Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch - 36262

This fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.

Features:

• Custom fit is designed specifically for your vehicle
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design
• Drawbar, pin and clip are sold separately
• Made in USA

Specs:

• Receiver opening: 1-1/4" x 1-1/4"
• Rating: Class II
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 300 lbs
• Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

36262 Draw-Tite Class 2 Trailer Hitch Receiver

This Product Fits The Following Vehicles

1998 - 2000 Volvo S70 All Models

1998 - 2000 Volvo V70 All Models

2003 - 2004 Volvo C70 Convertible

1998 - 2002 Volvo C70 Coupe and Convertible

1993 - 1993 Volvo 850 Sedan

1994 - 1997 Volvo 850 Sedan and Wagon

Customers Who Purchased This Trailer Hitch Also Bought...

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?

• Will the Draw-Tite Class II Trailer Hitch # 36262 Fit on a 1999 Volvo S70 Wagon
  
• The Draw-Tite Class II Trailer Hitch, item # 36262, will fit on all models of the 1999 Volvo S70 Sedan and all models of the 1999 Volvo V70 Wagon. So if you have a S70 GLT or a V70 GLT this is the correct hitch for your vehicle. I have posted installation instructions for you to review. Some Items you may need to complete your Class II towing setup are listed below. Wiring # 119176KIT Drawbar # 36061 Hitch Ball # 19256 or # 19258 Hitch Lock Kit # 7684
  view full answer...


• Does Installing Draw-Tite Trailer Hitch # 36262 on a 2000 Volvo V70 Require Drilling
  
• On some models that are compatible with Draw-Tite Trailer Hitch, # 36262, drilling is required. According to Draw-Tite, no drilling is required on the 1998 to 2000 Volvo V70, all models. I have included a link to the installation details for you to view. If you plan on doing some towing, the recommended ball mount is # 36061, and you can use pin and clip # PC2. For a ball, you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use # 119176KIT. I have inclu
  view full answer...


• Is Drilling Required for the Draw-Tite Trailer Hitch Installation on the 1995 850 by Volvo Sedan
  
• Yes, I can send you instructions and they are available from the product page for the Draw-Tite Class II Frame Trailer Hitch, item # 36262 (see link). Drilling is required for this installation. A 1/2 inch drill bit is needed to drill through the frame bracket bumper bracket and bumper on each side of the vehicle. It sounds like a lot of drilling but in reality you are only enlarging two holes for this installation. Some items you may need to complete a towing package for your 1995 Volvo
  view full answer...


• Will Draw-Tite Trailer Hitch # 36262 Fit a 1999 Volvo V70R All Wheel Drive (AWD) Model
  
• Yes, the Draw-Tite Trailer Hitch, # 36262, will fit your 1999 Volvo V70R all wheel drive model. I have included a link to the installation instructions below. If you plan on towing with this hitch, I recommend a drawbar, hitch ball, and wiring to complete your towing set up. For a drawbar, the recommended part is # 36061, for use with hitch ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For wiring, you would need Upgraded Circuit Protected Modulite with 4 Pole Harness and Ha
  view full answer...