Class II Drawbar 5" Rise (Kit)

Draw-Tite Ball Mounts - 36065

• Fits 1-1/4" x 1-1/4" Class II receiver-style hitches
• Uses ball with 3/4" shank diameter
• Measures 10" long from center of pin hole to center of ball hole
• Provides 5" rise from top of your hitch's receiver tube
• Rated for up to 3,500 lbs gross trailer weight and up to 300 lbs tongue weight
• Black powder coat finish
• Includes pin and clip

Customers Who Purchased This Ball Mounts Also Bought...

Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome $7.49

Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome $7.49

Rubber Tube Cover 1-1/4" $4.29

Hitch Ball Cover for 1-7/8" and 2" Diameter Hitch Balls $2.56

Wire Frame Clip $0.17

Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mounts?

• What is the recommended Draw Bar for a 1999 Cadillac DeVille
  
• The manufacturer recommended drawbar for your Cadillac DeVille is part number 36063 which has a 3-1/8 inch rise and 11-3/4 inch long distance between the center of the hitch pin hole and the center of the ball mount hole. When towing with a class II trailer hitch, the ball mount that is recommended by the manufacturer should be used. All class II trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer wil
  view full answer...


• What is the Finish on the Class II Drawbar 5 Inch Rise Kit, 36065
  
• The finish on the Class II Drawbar 5 inch Rise (Kit), # 36065, is a black powder coat.
  view full answer...


• Recommended Ballmount for a 2005 Toyota Prius
  
• The recommended ballmount for your vehicle would be part # 3593, which features a 2-1/8 inch rise or 2-3/4 inch drop. This would put the hitch ball at the most common trailer height. If you have not yet installed a hitch on your vehicle, I would recommend Hidden Hitch # 60894, as it will actually include a drawbar and pin and clip, and would install with no drilling. It looks like all the hitches available for your 2005 Toyota Prius are class I, so you would not be able to use a class II
  view full answer...


• Recommended Draw Bar with 5 Inch Rise for 1994 Dodge Caravan with Class II Receiver
  
• If your Caravan has a Class II receiver the Class II Draw Bar with 5 inch rise, part # 36065 will work just fine for you. Keep in mind that this draw bar accepts a trailer ball with a 3/4 inch shank. The draw bar is rated for a maximum of 3500 lbs towing weight and 300 lbs of tongue weight.
  view full answer...


• Can The Draw-Tite Ball Mount, # 36065, Be Turned Over And Used As A Drop On a Mercury Mountaineer
  
• A 1-1/4 inch hitch receiver is either a Class I or Class II hitch. All Class I and Class II can only use the ball mounts that are recommended for that vehicle. For safety reasons, if you have to change the rise or drop from the recommended ball mount, then the manufacturer does not recommend to tow that trailer with the Class I or Class II hitch on your vehicle. We have Class III hitches available for Mercury Mountaineers that will bolt on underneath the OEM 1-1/4 hitch. The Class III hit
  view full answer...


• Can a Class II Ball Mount be Used with a Class I Trailer Hitch on a 2006 Mitsubishi Eclipse GT
  
• With a Class I trailer hitch on your 2006 Mitsubishi Eclipse, you should only use the ball mount that is recommended for use with the trailer hitch. Another problem is that the ball mount that you have referenced is a Class II accessory. Class II items are designed so that they will not fit in a Class I trailer hitch. You could use Sportframe Drawbar, # 3592, which will give you a 2-1/8 inch rise or # C45016, which will give you a 2-5/8 inch rise.
  view full answer...


• What is the Recommended Ball Mount for a 2005 Toyota Sienna with a 1-1/4 Inch Trailer Hitch
  
• For a Class I or II trailer hitch with a 1-1/4 inch trailer hitch, you must use the ball mount that is recommended by the trailer hitch manufacturer. The reason is that the hitch has been tested with a specific ball mount and it is deemed to be the safest and best option for that vehicle and hitch combination. The only 1-1/4 inch hitch we carry for your 2005 Toyota Sienna is # C12065. The correct ball mount for this hitch is # C45016, and it must be used in the rise position only. It has a ri
  view full answer...


• Recommended Ball Mount and Other Towing Accessories for 2011 Chevy HHR
  
• For your 2011 Chevy HHR, our friends at Draw-Tite recommend the 4 inch Rise Sportframe Drawbar, part # 3594. To complete your towing system, you might also need the following: 1-7/8 inch trailer ball, part # 19256 2 inch trailer ball, part # 19258 Pin and clip, part # PC2 Locking hitch pin, part # 40106 Trailer Wiring Harness, part # 118407 To see the recommended products and to view a wiring install video, click on the provided links.
  view full answer...