See What Fits Your Vehicle
customer service | view cart  View Cart

Ball Mounts > Fixed Ball Mount > Standard Ball Mount > Rise - 3-1/8 Inch > Class II, 3500 lbs GTW > Fits 1-1/4 Inch Hitch > Long > Steel > Draw-Tite

36061
 36061  

Class II Drawbar 3-1/8" Rise (Kit)

Draw-Tite Ball Mounts

Rating: ratingratingratingratingrating
24 reviews


Code:   36061

Retail:$30.05

Price:$21.95

Shipping Weight: 7 pounds

Shipping Special
Quantity: 



Draw-Tite Class II Drawbar 3-1/8 Rise Kit Review - Video


Draw-Tite Ball Mounts - 36061

  • Fits 1-1/4"" x 1-1/4" Class II receiver-style hitches
  • Uses ball with 3/4" shank diameter
  • Measures 9-3/4" long from center of pin hole to center of ball hole
  • Provides 3-1/8" rise from top of your hitch's receiver tube
  • Rated for up to 3,500 lbs gross trailer weight and up to 300 lbs tongue weight
  • Includes pin and clip


Video of Class II Drawbar 3-1/8" Rise (Kit)


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review drawbar 36061
Draw-Tite Class II Drawbar 3-1/8 Rise Kit Review

Video Transcript for Draw-Tite Class II Drawbar 3-1/8 Rise Kit Review

Today we are going to show you Draw-Tite Class II drawbar kit, part number 36061. This drawbar is designed to fit 1-1/4 inch class II receiver hitches. A standard 1/2 inch pin and clip is included in the kit. The drawbar itself is designed to only be used in the rise position. It gives us a 3-1/8ths rise from the top of the shank, to the top of the ball platform. :28

Next we will show you how to mount it on a vehicle. Remember, this drawbar can only be used in the rise position. Slide the drawbar in and line up the hitch pin holes. Once the pin holes are aligned, feed the pin through and secure it with the clip on the other side. That is it for the Draw-Tite Class II drawbar kit, part number 36061.






Customers Who Purchased This Ball Mounts Also Bought...

Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome
Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome $7.49
Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome
Hitch Ball with 1-7/8" Diameter and Short Shank, 2000 lbs GTW - Chrome $7.49
Rubber Tube Cover 1-1/4"
Rubber Tube Cover 1-1/4" $4.29
Quick Splice Wire Connector - Tan - 14-18 AWG (Qty 1)
Quick Splice Wire Connector - Tan - 14-18 AWG (Qty 1) $0.16
American Flag 1-1/4" Trailer Hitch Receiver Cover
American Flag 1-1/4" Trailer Hitch Receiver Cover $14.95





Customer Reviews  -  Write a review about this product

Class II Drawbar 3-1/8 - 36061

Average Customer Rating:  ratingratingratingratingrating4.9 out of 5 stars   (24 Customer Reviews)


Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Christof04/06/2011

Is this review helpful?


Thank you so much for your prompt delivery of a quality product. 11222



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Ron Mason03/22/2011

Is this review helpful?


great shippingand good quality,thanx 10111



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Lee R03/21/2011

Is this review helpful?


Product arrived and it was a perfect fi t!10046



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Jeff G.03/14/2011

Is this review helpful?


Solid construction. Quick shipping. 9237



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: richard desousa03/06/2011

Is this review helpful?


fast shipping great package 8624



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: RON S12/10/2010

Is this review helpful?


FITS GREAT FITS GREAT3922



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: bobby reid02/22/2007

Is this review helpful?


quality a good looking hitch.. excellent quality and style..81



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Tim P.02/03/2012

Is this review helpful?


Fits my Buick Century to a T! Leveled my trailer and keeps the receiver away from the bumper the correct distance for trouble free turns.31010



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: James D.01/24/2012

Is this review helpful?


the raised ball is needed because the car sets so low.30262



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Nathan E01/09/2012

Is this review helpful?


GREAT FIT, GREAT PRICE, BETTER THAN GREAT CUSTOMER SERVICE AND SHIPPING29397



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Bob F.12/21/2011

Is this review helpful?


Looks and works as pictured. 28468



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Bob D.08/20/2011

Is this review helpful?


This is exactly what I needed. Thanks. Bob D.22377



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Deb H.08/15/2011

Is this review helpful?


good product for the price. 21957



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Travis S.08/04/2011

Is this review helpful?


Quality craftsmanship 21089



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Bruce K.08/01/2011

Is this review helpful?


The free upgraded shipping really helped me out and I was able to get my boat on the water this weekend instead of next. Price was right and easy to use website. Thank you.20826



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Jeff Hopikns06/13/2011

Is this review helpful?


Best I've seen yet.20 min to install plus wire kit. Thanks great company great product.16896



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: James T06/11/2011

Is this review helpful?


wish it had been american made 16749



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: nick06/10/2011

Is this review helpful?


trailer hitch and wiring came with very accurate instructions.the install went really smooth.etrailer is right on point. 16661



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Lori06/08/2011

Is this review helpful?


Very pleased with Etrailer.com...website easy to navigate and user friendly! Product exactly what we needed! Place our 2nd order today! FAST shipping!16449



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Robin J.06/01/2011

Is this review helpful?


Once installed the product seems just fine and of a good quality also. the directions were not complete enough and the install took a very long time. A small right angle drill or a flexible drill shaft would have saved a lot of time! If the directions were far better and the mention of really needing a non-typical drill were included.....I would have given an excellent rating.15893



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Jeff H.05/06/2011

Is this review helpful?


Product recieved, very fast shipping. Another great product from ETrailer, thanks 13008



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Gary F.04/18/2011

Is this review helpful?


Tried a couple different brands that I purchased locally. Nope, none would work. This one popped right on and was a great fit. 11954



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: DAVID WOOD04/14/2011

Is this review helpful?


What can you say about a drawbar? The weld appears saolid, the holes are round and it appears to be in great shape.11761



Class II Drawbar 3-1/8 - 36061

ratingratingratingratingrating by: Ron Mason03/30/2011

Is this review helpful?


excellant works graet and fast shipping 10757




Ask the Experts about this Draw-Tite Ball Mounts
Expert Answers about Class II Drawbar 3-1/8" Rise (Kit) - 36061 Do you have a question about this Ball Mounts?


  • Trailer Hitch for a 1999 Oldsmobile Delta Eighty-Eight
  • Yes, we do! We have a Draw-Tite Class II hitch, with 3,500-lb towing capacity and a 1-1/4 inch receiver opening. It is part number 36211. We also carry wiring, ball mounts, hitch balls, cargo carriers, bike racks, and products for all your towing needs.
    view full answer...

  • Which Drawbar Should be Used with a Draw-Tite Hitch on a 1993 Cadillac DeVille
  • The hitch manufacturers recommend drawbars for their hitches based on vehicle height and the most common trailer heights. The recommended drawbar for the 1993 Cadillac DeVille hitch is part # 36071 with a 2-5/8 inch rise or a 3-1/4 inch depending on orientation. Please refer to instructions for installing the hitch as which way the draw bar should be oriented. I will include a link to those instructions below. The hitch for your DeVille is Draw-Tite part # 36173. A lot of times if a draw ba
    view full answer...

  • Which Ball Mount Should be Used on a Hitch for a 2009 Dodge Caliber
  • With the Draw-Tite hitch, part # 24769, for your 2009 Dodge Caliber you should use part # 3591. I have added a link to the instructions for the hitch so that you can see the hitch profile and how the draw bar is positioned. Draw bar part # 36061 is for a Class II hitch and the hitches available for your Caliber are Class I, except for the Valley, so that ball mount would not fit in the hitch. I have included a link to all the ball mounts we carry for Class I hitches. You want the trailer t
    view full answer...

  • Which Drawbars Work with the Available Trailer Hitches for a 2003 Subaru Outback
  • Drawbar, # 36061, with a 3-1/8 inch rise is the recommended drawbar for use with the Hidden Hitch Trailer Hitch, # 90176 for the 2003 Subaru Outback. It is supposed to be used in the rise position only. It can also be used on Draw-Tite Hitch, # 36284. You can also use drawbar # 36053. It has a 5/8 inch rise if the rise on the other drawbar is too still too high.
    view full answer...

  • Recommended Ball Mount for Use with the Hidden Hitch Receiver Hitch # 90023
  • The Hidden Hitch Class II Trailer Hitch Drawbar, item # 90007, is the correct ball mount for use with the Hidden Hitch Trailer Hitch, item # 90023, on your 2001 Oldsmobile Alero. The installation instructions, see link, lists the recommended ball mount for this hitch. The Draw-Tite Ball Mount, item # 36061, has a slightly lower rise and a shorter shank than the # 90007 ball mount and is not designed for use on your vehicle.
    view full answer...


Custom Fit Trailer Hitch

Related Products...

etrailer.com Ball Mount Bag
etrailer.com Ball Mount Bag
ETBMB $9.35
Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome
Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome
19258 $7.49
Trailer Hitch Receiver Lock - Flush Design for 1-1/4" Trailer Hitch Receiver
Trailer Hitch Receiver Lock - Flush Design for 1-1/4" Trailer Hitch Receiver
7682 $19.95
Two-Balls-and-Sticks Hitch Aligner
Two-Balls-and-Sticks Hitch Aligner
53410 $19.95
Hitch Ball with 1-7/8" Diameter and Medium Shank, 2,000 lbs GTW - Chrome
Hitch Ball with 1-7/8" Diameter and Medium Shank, 2,000 lbs GTW - Chrome
19257 $8.49



Order Tracking
Shipping Information
Contact Us
About Us
Help Videos and Articles
Search
Privacy Policy

Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com