Reese Multi-Fit Motorhome Hitch

Reese Specialty Trailer Hitches - 36010

Motorhome (RV) Hitch

Frame brackets are adjustable, fitting a variety of frame widths.

• Trailer hitch has 2" x 2" receiver opening
• Adjustable brackets fit frames up to 46" wide
• Weight rating: 5,000 lbs GTW, 500 lbs TW
• Some modification of existing equipment (skid plates, plumbing brackets, etc) may be neccessary

Note: This is a general application product, and it is the responsibility of the installer to select a structurally safe location for attachment.

36010 Reese Multi-Fit Motorhome Hitch

Ask the Experts about this Reese Specialty Trailer Hitches
Do you have a question about this Specialty Trailer Hitches?

• Multi-Fit Motorhome Trailer Hitch Tongue Weight
  
• The tongue weight on Reese Trailer Hitch 36010 is 500lbs. Please consult your owners manual for towing recommendations and limitations.
  view full answer...


• Reese Multi-Fit Motorhome Trailer Hitch Measurements
  
• The Reese Multi-fit Hitch will adjust to fit motor home frame rails from 24 inches - 46 inches wide. The length of the mounting plate is approximately 10 inches.
  view full answer...


• CURT Universal Class V Weld-On Hitch Recommendation for a 2011 Fleetwood Terra 31TS
  
• If you had a very qualified welder install a hitch like a Class V Universal Weld-on Receiver Hitch # 15901 on your 2011 Fleetwood Terra 31TS you would have a hitch that is capable of 12,000 lbs GTW and 1,200 TW. This hitch has a 3.45 inch drop. If you need a hitch with a larger drop you should check out the CURT V Universal Weld-on Hitch # 15902. This hitch has the same towing capacities as the # 15901 but it has 13-1/2 inches of drop instead. I attached installation instructions for both
  view full answer...