Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Trailer hub assembly includes lug nuts, inner bearing (L44643) and race, outer bearing (L44643) and race, grease cap and grease seal. Fits 2,000-lb axles.
Dexter 8-91A should be stamped on back of hub
Note: Some axles rated at 2,000 lbs require a different seal and bearings. Be sure that the bearings in the hub being replaced have L44643 stamped on them. If the bearings have L44649 stamped on them, use 8-91-05UC1 trailer hub.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Video of Trailer Hub Assembly - 2,000-lb Axles - 4 on 4 - L44643 Bearings
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today were going to review part number 34822BX this is a Dexter Trailer Hub Assembly with a 4 on 4 bolt pattern for 2000-lb axles. This trailer hub assembly will include four of the 1/2-inch cone seat lug nuts. It will include the inner and outer bearing which will be the same part number that is L44643. It will include the grease cap and the grease seal which is part number 34823. Now the bearing races will also be included and they are already installed into the hub assembly. Here is the outer bearing race right there and if we go to the back youll see the inner bearing race right in there.
Most all our hub assemblies will come preinstalled with the bearing races. Now this application will fit on the 2000-lb axles. Now there is a note you want to make sure that some axles that are rated at 2000 lbs will require a different seal and bearing. Be sure that the bearings in the hub that youre replacing have the L44643 stamped on them. If it does use a bearing that will have L44649 stamped on them then you will need to use a totally different trailer hub which would be the part number A-91-05UC1.
The capacity on this hub assembly is 1250 lbs. So if you use this or pair this with a hub assembly of the same thing on the other side of the axle would give you a max of 2500 lbs. Now we do mention this is a bolt pattern of 4 on 4 and basically on a bolt pattern that would normally even number of lugs, which in this case would be four. You could just measure directly across from the center of one stud to the center of the other. But in this case because this hub sticks up or protrudes up some its going to be hard to actually get a correct measurement.
So what you can also do is just measure from the center of one stud to the center of the other and on a 4 on 4-inch bolt pattern that would measure up 2-7/8 inches. That will determine that this is a 4 on 4-inch bolt pattern. Now this hub assembly that uses the L44643 inner and outer bearing will be stamped on the back. Its stamped in it. It might be hard to see but it is stamped 8-91A.
And that should do it for a review on part number 34822BX.
Customers compare 34822BX to these similar products
Customers Who Purchased This Trailer Hubs and Drums Also Bought...
Replacement parts available for this product
Average Customer Rating: 
4.7 out of 5 stars (44 Customer Reviews)
by: Kerry05/05/2013
Is this review helpful?
Hub itself is better quality than the original hub I replaced on the trailer. I am extremely happy with the hub and it rates excellent. However the bearings, grease seal and cap are very cheap parts made in china. They rate poor in my book. What do you expect from a $3.25 China bearing? I installed the dry bearing into the race to check fit and it had flat spots and wobbled as I spun the bearing. All four bearings in 2 kits all had the same problem. I purchased 4 SKS bearings from local parts store @ about $8.50 each. They spin perfectly in the race. I upgraded the grease seal to a double lip instead of the single lip in the kit. I installed the cap with a rubber mallet and block of wood but they are thin and dented badly before they seated. They may work if you had a large socket or a collar that fit around the lip but if you contact the center of the cap in any way it will dent badly. I will replace those with a bearing buddy or better quality cap someday. What is the point of an assembly if you have to replace the substandard parts within it? Cheap bearing and single lip grease seal may work fine with light duty local hauling but I plan to run several hundred miles and believe I need better bearings and seals to handle the long miles without trouble. I did a 220 mile test trip yesterday and the hubs did not build any heat at all after the parts upgrades. I am not telling people to not buy this hub because the hub is excelent quality but I am telling people to plan on upgrading the bearings, seals and caps if they need a top quality trouble free assembly. Now let me tell you the good news. The price of the assmebly from Etrailer is good enough that even after the upgrades, the price is better than other hubs I found locally or on the web. Buy it but upgade it for the best possible hub assembly. I plan to purchase one more assembly from etailer as a back up. I do not want to be several hundred miles from home without a replacement I can install on the road if needed. Best $35 "insurance" I ever spent.79060
by: Don A03/31/2011
Is this review helpful?
exactly what I ordered and instock, recieved 3 days from the day I ordered, doesn't get any better than that, thanks, Don10853
by: Jeff03/19/2011
Is this review helpful?
The product arrived fast. Exactly what I needed and the price was great.9794
by: Harold West03/18/2011
Is this review helpful?
Fit perfect 9670
by: Gary03/04/2011
Is this review helpful?
Great product would buy and use again. 8427
by: Michael B.03/03/2011
Is this review helpful?
Building a Custom Double Kayak Trailer.........res for best prices.....E-Trailer has the prices and inventory I was looking for! I ordered a whole list of parts in two separate orders. Both orders were processed and shipped immediately and arrived well packaged and on time! Site is easy to navigate! Highly recommend for a new-build or repairs! 8336
by: anthony02/22/2011
Is this review helpful?
Got what I ordered again. Free shipping takes a while but shows up. Will oreder again, Im sure.7640
by: Bob Glover02/09/2011
Is this review helpful?
Excellent pricing, service and shipping! Arrived 3 business days after I placed the order. Will buy from them again (hope I won't have to--that means my trailer won't tear up!).6921
by: Dan B.01/25/2011
Is this review helpful?
Excellent - as usual ~ free and very fast shipping of high quality Dexter parts.6078
by: dan01/25/2011
Is this review helpful?
Everything came to my house within 3 days of order..well packaged and complete6060
by: pappoose01/14/2011
Is this review helpful?
nice hub great price i liked the hub it was new looks strong smooth design i just wish it was a galvanized hub i didnt find any on the site but this one will do the job 5495
by: Rick S.12/31/2010
Is this review helpful?
First Time User I had ordered a utility trailer wheel hub assy, ( I thought). It arrived quicker than I had paid for, but it wasn't an assemlby. I may not have read the smaller print on the product page when I had ordered the hub, which may be why I had expected all the parts to have been assembled upon receipt. Great job on the illustrated installation instructions!! Over all, I am very pleased with the service!4843
by: Lou Serino12/21/2010
Is this review helpful?
TRiple AAA Service!!! Quality product, great prices,excellent communication, warp .speed shipping. Doesnt get any better. Will definately buy again and highly recommend to all. 4441
by: Danny D.04/09/2013
Is this review helpful?
Everything fit perfectly, the hubs went on realy easily.75102
by: Robert02/15/2013
Is this review helpful?
I just got my order yesterday. Very good service. All of my products recieved look good. I would recommened this company to everyone.. 66443
by: Clark Olson10/12/2012
Is this review helpful?
Complete package. Makes ordering simple. 57058
by: Fran Bailey09/11/2012
Is this review helpful?
I was very pleased with the prompt delivery. My trailer was down and I desperately needed the two hubs to reassemble it and get my equipment back from the small engine guy. My order was processed in hours and arrived in just five days. I highly recommend etrailer. 54391
by: toby08/06/2012
Is this review helpful?
Heather was very helpful when ordering this part for my old boat trailer. She walked me thru the different measurements necessary to get the right hub. It fit the first time and I was back out on the boat cruising this weekend.50688
by: Nick W07/13/2012
Is this review helpful?
Great hub!! 47784
by: Dick N.07/11/2012
Is this review helpful?
Hubs fit fine and tires were mounted on wheels.47463
by: John L06/22/2012
Is this review helpful?
Hubs as described, fit together well, no problems.45249
by: Alex V06/22/2012
Is this review helpful?
I have a small 1200 lb Harbor Freight Tool trailer. The original bearings blew out and I had to replace the bearings, seal and hub. Went to our local Colorado Springs bearing supply house. I bought the hub, seal, bearings and cap for less that what they charged for one bearing, bought tires too - for less and better quality than what Discount Tire charged. Will be coming back45225
by: Jim06/15/2012
Is this review helpful?
Your processing, delivery and communication were very good. I would have given an excellent rating except the bearing seal was received with a slight bend and nick in it. In the interest of time, I am removing the seal from the old hub and using it. I recently ordered that seal from you and installed it before realizing there was another problem in the old hub. Thanks.....Jim44274
by: David K.06/11/2012
Is this review helpful?
Both hubs arrived as described. Will happily buy from etrailer.com again.43775
by: David M.05/21/2012
Is this review helpful?
The item was exactly what I needed. Very quick ship and reasonably priced. Would do business again without question.41188
by: Matt S04/18/2012
Is this review helpful?
Great product and shipped promptly. The difference between these hubs and my old ones is HUGE, really glad I decided to replace the whole assembly. Remember, this is just the hub assembly and bearings, so if you're replacing existing hubs, hold onto your castle nut and cotter pin. The dust caps are also a real tight fit so be patient when putting them on.37571
by: Dick M.04/13/2012
Is this review helpful?
Product was delivered very promptly and was just what I was expecting.37083
by: Pat A.04/13/2012
Is this review helpful?
Did not know trailer parts came this well built or as pretty looking. Shipping and service was s pleasure. Time to start rolling!37056
by: Mark F03/30/2012
Is this review helpful?
Everything was perfect, except for the dust cover. I had a time getting it on and damaged it in the process. It seemed just a smidgen to large. Shipping was excellent and arrived a day early! The price was excellent also! I will be ordering from etrailer again.35703
by: Dan Simpson03/30/2012
Is this review helpful?
Had an older boat trailer and the rear seal would not stay in place and allowed water to enter the hub. This replacement hub was a perfect fit and should solve my problem. Ordering was easy, shipment was fast. Thanks35611
by: Patrick N.03/26/2012
Is this review helpful?
Hubs worked great, perfect fit and half the price of buying local, will use again...35194
by: Robert Barnes01/28/2012
Is this review helpful?
I purchased a new hub with bearings for my boat trailer. The product arrived quickly and was an easy install.Overall experience, EXCELLENT!30471
by: Dan K01/20/2012
Is this review helpful?
etrailer made my purchase soo quick and easy. etrailer is one of the great onilne retailers. Thanks.30046
by: Jim B.09/23/2011
Is this review helpful?
I am very happy with the product. It fits perfectly and looks good too.24456
by: ken09/17/2011
Is this review helpful?
The hubs that I received fit the trailer without any effort . The bearings were adjusted and greased . Now the only thing that is left to do is use the trailer and hope the hub and bearings last forever . Thanks Ken24160
by: Tony08/21/2011
Is this review helpful?
I've built a few small trailers and carts with these hubs and spindles, and they work great! Etrailer.com has the best prices I've found so far.22395
by: Jason RUSOFF07/13/2011
Is this review helpful?
It arrived quickly and was very well made. I was replacing hubs and bearings from a Chinese trailer and it was pretty obvious how much better made this hub and bearings were.19343
by: Michael07/12/2011
Is this review helpful?
Fast shipping great service thank you 19307
by: Dave O.07/06/2011
Is this review helpful?
The purchaser, me, ordered the incorrect hub and it is being returned to etrailer. I called etrailer while the order was in transit to let them know that I had discovered my mistake and they were very understanding to my situation and even provided specific return instructions by a follow up e-mail. This is a great organization to do business with.18701
by: Darrell G06/07/2011
Is this review helpful?
Great price - quick delivery - product was exactly as I expected.16420
by: Wayne M.06/02/2011
Is this review helpful?
I needed to replace the hubs on my jon boat trailer. Etrailer had the exact hubs I needed, in stock. The description in their shopping cart made it easy to order the right part. They shipped promptly and I received the order within a few days. The hubs were well packed. Their quality is first rate. They even included bearings, seals, races which came installed in the hubs saving me some time (thank you!), and lug nuts at a price that was less than the bearings and seals alone were going to cost me at a local auto supply store. A diagram on their web site showed me how to install the innards and I installed both hubs on my trailer in a little over an hour. Thanks again, Etrailer.15993
by: John W06/01/2011
Is this review helpful?
eTrailer's customer service is 1st rate. I appreciated the follow-up. The new wheel hub is exactly what I needed and it is already installed. Was not too impressed with the bearings from China though. 15841
by: Bill F.01/30/2012
Is this review helpful?
Great response time and follow-up. I ordered this hub assembly on a Friday and received it on Tuesday. Everything needed was in the package to replace a damaged hub and bearings on a small trailer a friend and I are rebuilding. I did find damage to one of the bearings when I received it. I called etrailer, spoke to Ashley and another bearing was shipped that day. If I need any other trailer parts etrailer will get my business.30630
by: Dennis Crawford03/10/2011
Is this review helpful?
Original wheel bearings on the trailer finally give up after 30 years so went shopping at etrailer again. I received a replacement hub and bearings at a very competitive price and in a short time. It took 4 days via ground. I’m happy. I’ve purchased 4 hitches for four cars plus accessories through etrailer and I’m very satisfied with the product and service. 9056
Ask the Experts about this Dexter Trailer Hubs and Drums
Do you have a question about this Trailer Hubs and Drums?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
