Hopkins Custom Fit Vehicle Wiring - 33925
Plug-N-Tow (TM) Wiring Connectors provide a no-hassle, quick and easy way to wire
your vehicle.
- Each vehicle specific connector is pre-wired and uses original OEM connectors for water tight protection, a guaranteed fit, and a great look
- No cutting or taping
- 16 gauge wire
- 4-Pole connector includes dust cap
- Easy to follow instructions with pictures are included
- Maximum load on converter is 2.1 amps per left and right turn (one bulb on each side)
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the vehicle taillights.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
TAP # 33925 / Hopkins # 43925
This Product Fits The Following Vehicles
2005 - 2006 Kia Sportage 4 Cylinder Models
2005 - 2006 Kia Sportage 6 Cylinder Models
Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...
Ask the Experts about this Hopkins Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
- Trailer Wiring Harness for a 2007 Kia Sportage
- We have the Upgraded Modulite Circuit Protected Wiring Harness, item # 119175KIT, that will work great on your 2007 Kia Sportage with the 4 cyl. motor. This harness needs to be hardwired into the respective tail light circuits at the rear of your vehicle.
The Plug-N-Tow (TM) Wiring Harness, item # 33925, is designed to work on the 2005 and 2006 model year Sportage, 4 or 6 cylinder, but the wiring changed for the 2007 model year vehicles. The 2007 model year 6 cylinder models can use the T-One
view full answer...
- Kia Dealer Installed Trailer Harness and Is Now Malfunctioning
- I would say either the dealer gave you a bad part, or the wrong part. The yellow wires should be attached to the driver side tail light to supply the driver side blinker signal. The other connector goes over to the passenger side tail light. On the passenger side, the red wire picks up brake light signal, brown wire picks up running/tail lights, green wire is the passenger side turn signal and the white wire is the ground.
I imagine the part the dealer installed is something similar to part
view full answer...
- Which Trailer Connector is Necessary for Towing Small Trailer with 2006 Kia Sportage
- The four, five, six and seven pole adapters refer to the trailer connector that supplies power to the trailer for the lighting circuits. A small utility trailer such as the one you are wanting to purchase would use a 4-pole connector like the one supplied on the end of the wiring harness for your Sportage, part # 33925. Different adapters are offered so that the 4-pole connector can be used with trailers that utilize different connectors.
view full answer...
- How Does the Hopkins Custom Fit Vehicle Wiring # 33925 Install on a 2006 Kia Sportage
- In order to install this Hopkins Custom Fit Vehicle Wiring # 33925 on your 2006 Kia Sportage you will need remove the tail light wiring harness from the back of the tail lights of your vehicle and plug this unit inline with the tail light wiring harness.
Basically, you will unplug the harness from the back of the tail light, plug this unit into the wiring harness from your tail lights, and then plug this unit directly into your tail light assembly.
view full answer...
