Hopkins Custom Fit Vehicle Wiring - 33425
Plug-N-Tow Wiring Connectors provide a no-hassle, quick and easy way to wire
your vehicle.
Fits Toyota Highlander without the tow package. Will not fit Hybrid models.
- Each vehicle specific connector is pre-wired and uses original OEM connectors for water tight protection, a guaranteed fit, and a great look
- No cutting or taping
- 16 gauge wire
- 4-Pole connector includes dust cap
- Easy to follow instructions with pictures are included
- Each kit includes everything needed to complete a 4-wire flat installation
- Kit includes wire, fuse and connectors necessary for power supply hook-up at the battery
- Powered converter with circuit protection is included in a weatherproof double-molded design
- Circuit Protection guards the tow vehicle and the converter itself from trailer shorts
- Max Draw: 8 Amps
Can be used with 5-pole, 6-pole or 7-pole adapters.
Plug-N-Tow Wiring Connector plugs in behind each tail light on the Highlander.
For 2001-03 Highlander models with the tow package use part # 118245. If your 2004 or later Toyota Highlander has the tow package, see the vehicle dealer for a wiring harness.
Hopkins # 43425, TAP # 33425
This Product Fits The Following Vehicles
2001 - 2005 Toyota Highlander
2006 - 2007 Toyota Highlander All Models, except Hybrid
Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...
Ask the Experts about this Hopkins Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
- Comparision of Wiring Harness 33425 and 118413 for a 2002 Toyota Highlander
- You basically answered your own question. The more expensive 33425 wiring harness has circuit protection and is powered so that you can tow trailers with more lighting. You will need to run a wire to the battery from the converter box to use this connector.
The 118413 will work fine if you are towing trailers with just one set of lights at the back and no extra lighting. However, it will not protect the vehicle and converter from shorts at the trailer.
Both kits come with instructions and
view full answer...
- Trailer Wiring Harness for 2002 Toyota Highlander
- The Plug-N-Tow wiring harness you mentioned, part # 33425 is indeed the correct harness for your 2002 Highlander.
The harness is pretty easy to install, using existing connectors located behind the tail light assemblies with an additional wire that is ran to the positive battery terminal.
Assuming that you already have a drawbar like part # 2923 for a 2 inch receiver or # 36051 for a 1-1/4 inch receiver and the appropriate trailer ball for your trailer, you are good to go.
view full answer...
- Recommended Trailer Wiring Harness for a 2007 Toyota Highlander Without Factory Tow Package
- The # 33425 Curt wiring harness that you referenced would work well for your 2007 Toyota Highlander, since it does not have the factory tow package. This harness would simply plug in behind your tail light on each side of the vehicle.
The # 33425 harness includes a power wire that you will run to the vehicle's positive battery terminal, with the included fuse placed in line. This will help to protect the wiring system on your Highlander from overload, as the power for the harness is pulle
view full answer...
