Valley Odyssey II Inertia Activated Electric Trailer Brake Controller
The new double-axis accelerometer technology continually checks and then
adjusts for varying road terrain. The brake controller also senses the
vehicles rate of deceleration and applies a proportionate amount of braking
power to the trailer as fast as is needed, providing only the smoothest of
stops just like the original Valley Odyssey. Upgrades include 4 memory preset locations for your different trailers, pressure sensitive manual trailer brake activation and enhanced display graphics!
- Features:
-
- Aside from smoother stops, proportional braking means less wear on both the trailer and vehicle brakes
- Works proportionally even traveling in reverse
- Auto-leveling for an even easier installation
- Exclusive 4 Load Range ("Boost") settings for even greater adjustment
- Press-down pressure sensitive manual override will still activate brake lamps
- 4 User Memory Presets - retains the Power Output and Load Level setting combinations for specific trailers, loads or driver specifications
- Easy to read digital display
- Diagnostics system continually checks for shorts and trailer connection
- Power saving mode increases vehicle battery life
- Includes mounting bracket
- Additional mounting brackets are sold separately making it easier to use the same controller in more than one vehicle
- New easy disconnect feature allows removal and storage of the controller when not in use
- Vehicle specific wiring adapters are available (sold separately) to make installation simple
- Plug on the back of the controller will work with Valley and Tekonsha quick disconnect harnesses
- Controller will work on most trailers with electronically activated hydraulic brake systems
- Valley Odyssey II is polarity protected - if the positive and negative leads are reversed the unit will isolate itself from power input
- Limited lifetime warranty
- Specs:
-
- Dimensions: 3-5/8" (W) x 4-3/4" (L) x 1-1/2" (H)
- Made for up to four-axle trailer brake systems (8 Brakes)
- 360 degree vertical plane operating range
- Can be mounted pointing straight down or straight up
- 20 degree horizontal mounting range
- Boost levels increase power up 0%, 16%, 25% and 28%
- Power saving sleep mode draws .003 milliamps
- Made in the USA
- Required: For vehicles without brake control adapters.
-
The Odyssey II comes with a pigtail adapter that plugs into the back of the unit and then accepts Valley vehicle specific brake control adapters. The port on the controller will also work with Tekonsha wiring adapters.
