Replacement Spring for Reese and Draw-Tite Fifth Wheel Trailer Hitches

Reese Accessories and Parts - 30776

Replacement Spring for Reese and Draw-Tite Fifth Wheel Trailer Hitches

• Used in conjuction with the actuating rod of the fifth wheel hitch head.
• Designed for Reese and Draw-Tite 14K, 15K, 16K, 20K, 22K and 30K Fifth Wheels.
• Will Not work with Signature Series or ProSeries styles of fifth wheels.

Customers Who Purchased This Accessories and Parts Also Bought...

Ask the Experts about this Reese Accessories and Parts
Do you have a question about this Accessories and Parts?

• How To Install The Reese Replacement Spring, # 30776, On A Reese 16K Fifth Wheel Hitch
  
• Usually, these springs should not have to be replaced unless they are damaged. You will want to check the Reese Replacement Spring, # 30776, and make sure it is not damaged and check the Reese 16K Fifth Wheel Hitch, # RP30047, to make sure that there is no other damage to the hitch. The springs are located in the head assembly. One goes from one side of the hitch jaws to the other side. The long side of the spring (hook furthest from the coils) attaches to a pivot point on the flat rod close
  view full answer...


• Is 1/2 an Inch Too Much Play Between the Jaws and Pin When My 5th Wheel Hitch is Hooked Up
  
• What you are experiencing is chucking, that is the sound and feeling of the trailer moving around behind you. There is normally a little play between the jaws and the king pin, 3/8 inch to 1/2 inch is a normal amount of play. Unless you have a cushioned pin box you will experience what you are describing. The part # for the Replacement Jaw Kit for Reese, Draw-Tite and Hidden Hitch Fifth Wheel Trailer Hitches is # 58056, the Replacement Spring has a part # 30776. You could also install a 5t
  view full answer...


• How Many Springs are Inside of Draw-Tite 16K Fifth Wheel Trailer Hitch with Slider, # 6033
  
• In the head unit of the Draw-Tite 16K Fifth Wheel Trailer Hitch with Slider, # 6033, there are 2 springs. One spring attaches to the near side of the handle and the other end attaches to a mounting point at the front of the hitch and is basically straight, front to back. The second spring attaches to the far end of the handle and comes diagonally across the hitch jaws where it attaches to lever that i part of the jaw opening and closing mechanism. Both of these springs can be difficult to rea
  view full answer...


• Diagram for Replacing 5th Wheel Hitch Head Spring
  
• Due to the location of the springs in the head of the fifth wheel it would be very difficult to get a picture that would be helpful to you. However, I was able to get a diagram that shows how the spring installs and I attached it for you to check out. I can describe where they are located in a hitch and how to install Replacement Spring, part # 30776. The springs are located in the head assembly. One goes from one side of the hitch jaws to the other side. The long side of the spring (hook
  view full answer...


• Necessity To Replace Spring on Reese 15K 5th Wheel Trailer Hitch
  
• You should not have to replace the springs on your Reese 15K 5th Wheel Hitch, unless they are damaged. But, it would not hurt to replace the springs and also look over and grease the hitch as indicated in the instructions. You should check over your 5th wheel hitch periodically to make sure everything is functioning and working properly, as you probably already do. You will want to replace both springs at the same time. I have attached a diagram that shows how the springs attach in the he
  view full answer...