Tekonsha Accessories and Parts - 3070-P
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
3070-P Tekonsha Brake Control Wiring Adapter with 2 Plugs
Customers Who Purchased This Accessories and Parts Also Bought...
Ask the Experts about this Tekonsha Accessories and Parts
- Brake Controller Wiring for a 2007 Honda Pilot
- The Wiring Adapter, part # 3070-P will work on the Honda Ridgeline only. The 2007 Pilot does not have the provision for plugging in a controller under the dash. To install a controller in your Pilot, you will have to hardwire the controller, using our Brake Controller Installation Kit, part # ETBC7 (for a 7-way connector) or ETBC6 (for a 6-Way connector). The install kits contain everything necessary for installing your brake controller.
If your Pilot does not already have the 4-pole trailer co
view full answer...
- Will Tekonsha Brake Controller Harness 3070-P fit a 2010 Honda Pilot with OEM Tow Package
- Yes, with an OEM tow package and 7-Way trailer connector, part # 3070-P would make newer Tekonsha brake controllers a plug and play installation.
The harness is compatible with brake controllers like the Primus IQ, Prodigy, Prodigy P2, and P3.
view full answer...
- Will Tekonsha Brake Controller Harness, # 3070-P, Fit 2005 Honda Odyssey With Prodigy Controller
- The Tekonsha Brake Controller Wiring Harness, # 3070-P, is only for Honda Ridgeline and Honda Pilot with the factory tow package.
To wire the Prodigy brake controller on your 2005 Honda Odyssey you will need to have a 4-Pole trailer connector on your vehicle.
Then, you will have to hardwire the brake controller with the Brake Controller 7 & 4 Way Installation Kit, # ETBC7, to your vehicle.
If you do not have a 4-Pole trailer connector on your vehicle, then you will need to install the
view full answer...
- Is a Brake Controller Wiring Harness Connector Available on the 2005 Honda Pilot
- The Wiring Adapter, part # 3070-P will work on the Honda Ridgeline only. The 2007 Pilot does not have the provision for plugging in a controller under the dash. To install a controller in your Pilot, you will have to hardwire the controller, using our Brake Controller Installation Kit, part # ETBC7 (for a 7-way connector) or ETBC6 (for a 6-Way connector). The install kits contain everything necessary for installing your brake controller.
Since your Pilot already has the 4-pole trailer connect
view full answer...
- How to Install the Tekonsha P3 Brake Controller on a 2011 Honda Odyssey
- The 2011 Honda Odyssey with the factory tow package does not come with a connector for the 3070-P brake controller wiring harness under the dash, so you will have to hard wire the vehicle for a brake controller. The Brake Controller 7 and 4 Way Installation Kit, item # ETBC7, will be needed, along with a 4-Way wiring harness, item # 118521, at the back of the vehicle. If you already have the 4-Way with the factory tow package you will not need the 4-Way wiring harness to complete the brake contr
view full answer...
- Brake Controller Installation on 2011 Honda Ridgeline
- If your Ridgeline is equipped with the factory tow package, you can use the Tekonsha Wiring Adapter, part # 3070-P to connect a controller. The presence of the factory 7-way trailer connector on the rear bumper is a sure indication that your Ridgeline is equipped with the tow package.
To install the controller, simply plug the larger end of the connector into the connector located under the dash. The connector can be found taped to another harness, to the left of the steering column near the
view full answer...
- Tekonsha Primus IQ Brake Controller # TK90160 Not Working on 2009 Honda Pilot With # 3070-P Harness
- The Tekonsha Wiring Harness, part # 3070-P, with the Tekonsha Primus IQ Brake Controller, part # TK90160, is for use on a 2009 Honda Pilot with the OEM tow package and the factory 7-Way trailer connector on the rear of your vehicle. You will want to make sure that your vehicle has the factory OEM tow package.
The wire colors on your Honda factory brake controller connector could be different than the standard black, red, blue and white colors on the # 3070-P connector. Each vehicle manufactu
view full answer...
- Parts Needed to Install a Trailer Brake Controller on a 2003 and 2009 Honda Pilot with Tow Package
- The 2009 Honda Pilot can use a wiring adapter for the brake controller but there is no adapter available for the 2003. So you will need to hardwire it. But lets start with the 2009.
You will need the brake controller and the wiring harness. The brake controller is part # 90195 and the wiring harness is # 3070-P that you have referenced. I have included a link to the installation details for the brake controller for you.
The brake controller comes with a harness that has blunt cut wires. Yo
view full answer...
