Signature Series Underbed 5th Wheel Hitch Installation Rails
The new "Power Puck" mounting system allows the hitch to be installed in the pickup truck bed with only four small holes. The mount holes are flush in the truck bed; therefore, once the fifth wheel hitch is removed, nothing will interfere with whatever is going into the truck bed next. Once the Signature Series hitch is placed into the underbed mounting rails, four quarter-turns (one on each of the legs) of the mount handles secure the hitch. Two padlocks are then all it would take to make sure the hitch isn't going anywhere. The new tight lock also reduces the noise and play associated with the older mounting system of pins through rails.
- E-Coat base with black powder coat finish
- Custom-fit, underbed mounting system
- Wider platform/mounting footprint increase stability
- Some drilling is required into the side of the vehicle frame
- For a no-drill installation kit for the 01-06 Silverado/Sierra 3500 Series and the 07 Silverado/Sierra Classic 3500 Series, use #30082
|
Mounting brackets mount to the side of the vehicle frame using existing holes whenever possible.
|
|
When the fifth wheel hitch is removed, no rails are left behind to get in the way.
|
