Trailer Suspension > Hangers > For Double Eye Springs > For 1-3/4 Inch Wide Spring > 9/16 Inch Diameter > Redline

Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs

Rating: rating rating rating rating rating
1 reviews

Code: 30-20

Price:$4.89

Shipping Weight: 1 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Redline Trailer Suspension - 30-20

Rear Hangar used on 1-3/4" Wide Springs with 9/16" Spring Eye I.D.

Customers Who Purchased This Trailer Suspension Also Bought...

Shackle Bolt with Locknut for Double-Eye Springs - 3" Long $1.44

Shackle Strap - 2-1/4" Long $0.70

Front/Rear Hanger for Double-Eye Springs - 1-1/2" Tall - 9/16" Bolt Hole $3.09

Shackle Strap - 2-5/8" Long $0.70

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long $1.64

Customer Reviews - Write a review about this product

Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4 - 30-20

Average Customer Rating: rating rating rating rating rating 5.0 out of 5 stars (1 Customer Reviews)

Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4 - 30-20

rating rating rating rating rating by: John S04/09/2011

Is this review helpful?

Weld-on rear spring hanger. Much better than the completely worn-out original rear spring hangers on my Pace American 5 x 10 trailer, due to the bushing. This gives a much larger bearing surface for the shackle bolts. Combined with wet - lubricated - spring shackle bolts (Part # 126B2), these should last a very long time11409

Ask the Experts about this Redline Trailer Suspension
Expert Answers about Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs - 30-20 Do you have a question about this Trailer Suspension?

Outer Diameter of Bushing on Suspension Hanger Part # 30-20
The bushing on the Rear Single Axle Trailer Suspension Hanger is welded in place, and is not available separately. I walked out to our warehouse and pulled one of the hangers off the shelf. The outer diameter of the bushing is .76 of an inch as measured by a digital caliper.
view full answer...

How To Mount Redline Rear Hanger # 30-20 On A Trailer
On the Redline Rear Hanger, part # 30-20, the hanger has top stamped into one of the sides of the hanger. The hanger is welded to the trailer with the side marked top, facing the outside of the trailer with the word top showing. I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer. The Dexstar Aluminum Star Mag Trailer Wheel, # AM20305, has a zero offset. This will mean the hub mounting surface of the wheel is at the centerline of the wh
view full answer...