Draw-Tite Invisi-Hitch Drawbar Kit

Draw-Tite Ball Mounts - 28451

Draw-Tite Class I trailer hitch vertical drawbar

• Ball mount fits 1-1/4"" x 1-1/4" Class I Invisi-hitch hitches.
• Uses ball with 3/4" shank diameter.
• Ball mount is 10-5/8" long from center of pin hole to center of ball hole.
• Ball mount provides 3-1/2 rise.
• Rated for up to 2000 lb. and up to 200 lb. tongue weight.
• Includes pin and clip

The new swivel pin makes it even easier to secure the drawbar in the hitch.

Customers Who Purchased This Ball Mounts Also Bought...

Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mounts?

• Will the Draw-Tite Invisi-Hitch Drawbar Kit # 28451 Fit on a 2006 Dodge Magnum RT
  
• You will need to get under the rear of your 2006 Dodge Magnum RT and measure the receiver opening to determine the correct drawbar size that will work with your hitch. The hitch we carry for the 2006 Dodge Magnum RT, # V81811, requires a 2 inch vertical draw-bar. A horizontal ball mount, # V76452, a horizontal 1-1/4 inch receiver, # V76472, or a 2 inch horizontal receiver, # V76462, can be purchased for the hitch we carry. I believe the hitch on your vehicle will also have a 2 inch vertical r
  view full answer...


• What Trailer Hitches Will Fit a 2006 Ford Mustang GT Convertible
  
• For the 2006 Ford Mustang GT, we list 2 possible trailer hitch options. First is the Draw-Tite Trailer Hitch, # 24747. Next we have the Hidden Hitch, # 60809. Neither hitch will accept the Invisi-Hitch, # 28451. Also, these hitches will not fit the GT/CS (California Special), Shelby GT, or GT500. Both hitches install the same and have the same specs: 200 pounds tongue weight capacity and 2,000 pounds gross trailer weight capacity. Both are Class I trailer hitches with a 1-1/4 inch receiver.
  view full answer...