Draw-Tite Ball Mounts - 2793
Draw-Tite Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 10" long from center of pin hole to center of ball hole
- Provides 6-3/4" rise or 8" drop from the top of your hitch receiver tube.
- Rated for up to 5000 lbs GTW and up to 500 lbs TW
Class III (2" x 2") ball mount accessories
Customers Who Purchased This Ball Mounts Also Bought...
Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mounts?
- Distance from Center of Hitch Pin Hole to Nearest Edge of Support Plate on Ball Mount # 2793
- If your 2010 Chrysler Town and Country has Hidden Hitch Trailer Hitch # 87451, with a 2 inch receiver opening, you will be able to use other ball mounts. But if you have # 90169, you can only use the one that comes with it.
On the Draw-Tite Ball Mount, # 2793, the distance from the center of the hitch pin hole to the support plate is 4 inches.
If that is not enough clearance, you could try the Curt Ball Mount, # D-28. This will give you a 4 inch rise and measures 8-1/4 inches from center o
view full answer...
- Ball Mount Recommendation for a 2009 Subaru Tribeca Towing a Casita Trailer with Sway Control
- I believe what you have is friction style sway control. All you will need is a Reese Sway-Control Bracket, # RP26003. This will fit on 2 inch ball mounts. Or, for 1-1/4 inch ball mounts, use # RP26005.
If your 2009 Subaru Tribeca has a 2 inch trailer hitch receiver, the recommended ball mount is # 2923. If it has a 1-1/4 inch receiver, the recommended ball mount is # C45501. I have included a link to our ball mount FAQ article for you to view.
view full answer...
