Trailer Jack, 2000 lbs. for A-Frame Couplers - Side Wind

Atwood Trailer Jack - 273400

Atwood Sidewind A-Frame Trailer Jack. For mounting on A-Frame Couplers with bolt-on or weld-on applications.

• Capacity: 2000 lbs.
• 14" lift
• 7-3/4" bracket height
• 24-1/4" retracted height
• 2" inside diameter

Atwood # 87510

Customers Who Purchased This Trailer Jack Also Bought...

Ask the Experts about this Atwood Trailer Jack
Do you have a question about this Trailer Jack?

• What is the Outside Diameter of the Large Tube on Atwood Jack 273400
  
• A-Frame jacks are all the same size and have the same bolt-pattern on them. The manufacturers did this so they could simplify the manufacturing process for both bolt-on and weld-on A-frame jacks. Going heavier is not a problem for jacks. Better to use a 2,000 pound jack when only a 1,000 is needed than to use a 1,000 pound jack when you really need a 2,000 pound. The large tube measures 2-7/32 inches. The inner tube, that attaches to the foot or makes contact with the ground is 2 inches OD
  view full answer...


• What is the Diameter of the Inner Tube on the Trailer Jack, 2000 lbs. for A-Frame Couplers # 273400
  
• The outside diameter of the inner tube of the Trailer Jack, 2000 lbs. for A-Frame Couplers - Side Wind, part # 273400, is 2 inches.
  view full answer...


• Trailer Jack with 30 Inch Lift Height Needed
  
• We have one sidewind jack available with a 30 Inch lift, it is the Shelby Weld-On, Drop Leg Trailer Jack, item # 6101B. This style of jack allows you to drop the leg 15 inches and then crank the jack up another 15 inches. In the A-Frame jack category, the highest lift sidewind jack that we have that is rated for 1,500 lbs or over is the Atwood 2,000 lb Trailer Jack, item # 273400, that you selected. This jack has 14 inches of lift. We also offer the Tall Jack Foot, item # 274600 which will ex
  view full answer...


• Will Atwood Trailer Jack # 273400 Fit a 1995 A-Frame Float-On Trailer
  
• The Atwood Trailer Jack, # 273400, is designed to fit the standard bolt pattern of A-frame jacks. The outer tube diameter is 2-7/32 inches in diameter so you will need to make sure that the trailer can accept this size tube. You may also be interested in adding a bottom support plate, # DL22763, to the trailer if it does not already have one. This bottom plate is a weld-on application and any welding will need to be performed by a qualified professional. This jack does not come with a wheel o
  view full answer...


• Recommendation for a A-Frame Replacement Jack for Marine Applications
  
• Yes, the Atwood Sidewind A-Frame Trailer Jack, item # 273400, is suitable for marine applications. This jack is not coated for corrosion resistance and will require upkeep such as cleaning and painting over time. A better choice for marine applications would be the Bulldog Round, A-Frame Jack, item # BD1550101344, which has a corrosion resistant zinc finish which would require less maintenance over time.
  view full answer...


• Shelby Weld-On Jack # 6101B Recommendation
  
• One of the jacks that we sell that has the largest amount of lift travel is the Shelby Weld-On # 6101B. This jack can do 15 inches of lift once the foot plate is planted.
  view full answer...