Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Rating: rating rating rating rating rating
42 reviews

Code: 24847

Retail:$175.88

Price:$99.95

Shipping Weight: 23 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Trailer Hitch Installation - 2010 Toyota Prius - Video

Draw-Tite Trailer Hitch - 24847

This fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.

Features:

Custom fit is designed specifically for your vehicle
Computer-aided, fully welded steel construction ensures strength and durability
Tested Tough - safety and reliability criteria exceed industry standards
Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
Lifetime technical support from the experts at etrailer.com
Black powder coat finish covers e-coat base for superior rust protection
Sturdy, square-tube design
Drawbar, pin and clip are sold separately
Made in USA

Specs:

Receiver opening: 1-1/4" x 1-1/4"
Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24847 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Trailer Hitch Installation - 2010 Toyota Prius

Video Transcript for Trailer Hitch Installation - 2010 Toyota Prius

Today on this 2010 Toyota Prius we are going to install part number 24847 from Draw-Tite. This also applies to part number 60263 from Hidden Hitch. On the passenger side we are going to have to lower the exhaust. We are going to take down this bracket here with those two bolts. What will happen is the hitch will go up and the bracket will go on top of the hitch when we are done. :21

We are just going to leave it all just like that. Our hitch is going to fit between the frame and the bracket. Go back to the driver side and take down the driver bracket. The hitch is going to mount up on the frame here. Right now it is covered up by the tie down bracket so this bracket is going to come down with the bolts so that is what we are going to do on this side. :48

There is a lot of plastic underneath this vehicle here, and actually this is going to stay up there. What is going to happen is we are going to put the hitch up in an angle and inside. Then we can start installing the hitch. We will go ahead and put our hitch up into place. We will start by ing the drivers side into the plastic. We are just going to let it hang there. Then we will work it on the other side, back over the exhaust hanger on the passenger side. We will put it all together just like that. We will go back over to the drivers side and get that started. The trick is to get the bolts in here is to use and extension. We actually put a little nut inside of the socket here to hold the bolt up a little higher than normal. We will go ahead and just thread it up into place. 1:44

All right now that we have all the bolts started we will go ahead and snug them all down. Then we will torque them as specified in the instructions. All right, and there you have it for part number 24847 from Draw-Tite.

This Product Fits The Following Vehicles

2010 - 2012 Toyota Prius

Customers Who Purchased This Trailer Hitch Also Bought...

Rubber Tube Cover 1-1/4" $4.29

Sportframe Drawbar 2-1/8" Rise or 2-3/4" Drop 2000# Kit $21.95

American Flag 1-1/4" Trailer Hitch Receiver Cover $14.95

Customer Reviews - Write a review about this product

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24847

Average Customer Rating: rating rating rating rating rating 4.9 out of 5 stars (42 Customer Reviews)