See What Fits Your Vehicle
customer service | view cart  View Cart

Custom Fit Trailer Hitch


24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814Trailer Hitch 24814

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Trailer Hitch

Rating: ratingratingratingratingrating
42 reviews


Code:   24814

Retail:$227.00

Price:$122.95

Shipping Weight: 22 pounds

Shipping Special
Quantity: 




Draw-Tite Trailer Hitch - 24814

This fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.

Features:

  • Custom fit is designed specifically for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar, pin and clip are sold separately
  • Made in USA


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.




24814 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe



Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video install trailer hitch 2011 toyota corolla 24814
Trailer Hitch Installation - 2011 Toyota Corolla

Video Transcript for Trailer Hitch Installation - 2011 Toyota Corolla

Today on this 2011 Toyota Corolla, we are going to install part number 24814 from Draw-Tite. This will also apply to part number 60200 from Hidden Hitch. OK this is what the hitch looks like when it is installed on a vehicle. Next we will give you some measurements to help you out in selecting some accessories. From the center of the hitch pin hole to the outside edge of the bumper is going to be 3-3/4 inches and from the top of the receiver opening, down to the ground will be 12 inches. Now we will go ahead and show you how the hitch is installed. We can go ahead and show you where the hitch is going to mount up to the car.

There are two threaded holes here and here on the frame. We are looking at the driving side. Now the passenger side is the exact same thing except the exhaust is close to it. What we will do first off is go ahead and clean off the holes and make sure there is no debris inside there so we can thread in the bolts easily. Get some spray lubricant and use a wire brush to help clear out the threads. And the wire brush part number is 814092. Since this is a newer car, it will be easy to work with. But the older the vehicle is, the more time you need to spend on this. Worst case scenario, you have to use a thread tap.

Our driver side is done. Let us repeat the same process over on the passenger side. Next we can go ahead and start installing the hitch. We will just hold the hitch up against the frame and start threading in the bolts. That will hold it for one side. Let us go over to the passenger side and do it one more time. And you will notice the hitch also has a cut out to go around the exhaust hanger.

You go ahead and install the remaining hardware. With all the hardware in place you go ahead and snug down the bolts then torque them down as specified in the instructions. Ok in a few easy steps out hitch is easily installed and there you have it for part number 24814 from Draw Tite.


This Product Fits The Following Vehicles

2003 - 2011 Toyota Corolla Sedan




Customers Who Purchased This Trailer Hitch Also Bought...






Customer Reviews  -  Write a review about this product

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

Average Customer Rating:  ratingratingratingratingrating4.9 out of 5 stars   (42 Customer Reviews)




Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Travis R.01/25/2012

Is this review helpful?


Easiest installation ever, 15 mins. tops. Make sure the predrilled threads on the car are clean then bolt it on. No drilling, nothing to move. Solid, well fabricated unit, should work well for a bike rack or small trailer.30364



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Joel G.08/02/2011

Is this review helpful?


Great product, really fast shipping, and excellent service.20930



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Steve07/27/2011

Is this review helpful?


We are very satisfied with this product. Ordering was hassle free. Delivery was quick and the product was extremely easy to install. Very happy.20330



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Robert D07/13/2011

Is this review helpful?


Highly recommended. This is the 2nd hitch I purchased from E-T. The trailer hitch for my Toyota was a perfect fit, just as advertized. The components were high quality and they all matched as a complte assembly. The directions on-line led me to purchase the easiest to install hitch. The packaging was secure and protected the components. Customer service was knowledgable and helpful. The only thing that could be better is the delivery. Probably a UPS issue, but the 3-5 days was a full 5 days. Suggest time certain delivery if you need it fast.19371



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Tim W07/08/2011

Is this review helpful?


Hands Down the best .Com on the Web today, promp great price, follow through from start to finish.. Its Great to see that people really care about customer service... Keep up the great work and thank you for the outstanding service!!18914



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Martin R05/24/2011

Is this review helpful?


Easy install and good follow up help. It was easy enough to take on and off when not using it.15235



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Bill K.05/15/2011

Is this review helpful?


Fit perfectly. Took less than a half hour to install by myself. 14085



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Clay B05/01/2011

Is this review helpful?


Arrived quickly, in perfect condition, all the pieces in the box, nothing to complain about.12651



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Stephanie04/18/2011

Is this review helpful?


Installed the trailer hitch receiver, ball mount and hitch ball in less than 30 minutes all by myself! Hooked the right side of the hitch onto the muffler and set the left side onto the car jack, ratcheted in the four bolts and viola! I would highly recommend this product - it looks great mounted and it is EASY to install. Thanks, etrailer.com! Stephanie11971



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Bob Piesz04/13/2011

Is this review helpful?


Hitch fit perfect..... Easy to install .....The wiring harness was a bit more complicated...But the instructions were clear and everything looks and works Great !!!!! Will order again and will recomend to friends......11659



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Harry Gramse04/06/2011

Is this review helpful?


I ordered this unit for my friends who have a 2008 Toyota Corolla. They traded in their van, and now they needed a hitch for their bike carrier on the Corolla. Ordered it on Friday, got it on Monday, installed it Wednesday. Everything worked great, just had to clean out the threads on the car with a tap, everything fit great! We are very Happy with this unit.11203



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Jim S.03/27/2011

Is this review helpful?


Very prompt delivery. Hitch and wiring harness all fit and very good directions.10479



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Joel o03/25/2011

Is this review helpful?


Is what I expected and easy to install. 10330



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: James H03/03/2011

Is this review helpful?


I was skeptical that the reviews I'd read before purchasing weren't entirely accurate, but after this hitch receiver was delivered, it was installed on my car about 20 minutes later. Couldn't have been any easier, and the delivery was 3 days. Three different people emailed me letting me know the progress of my order, along with an after-delivery check-up email. Very nice to see over-communication like this, almost unheard of these days.8328



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Roger C.03/01/2011

Is this review helpful?


I'm a web developer so I especially appreciated your clean but very helpful site. I just typed “2008 Toyota corolla trailer hitch” into Google and in one click I was on an uncluttered (quick loading) page showing several hitches that would fit. There were pictures and brief descriptions of each with links to appropriate wiring kits and install instructions (PDF and Video). I made choices and went through the standard “My Cart” checkout in just a few minutes. Your tracking page has a nice touch. It grabs tracking data from UPS and plots the progress on a “Google Map.” My order arrived ahead of estimated time and installation was a breeze. I’m very satisfied with my etrailer.com experience. All on-line purchases should be this painless. 8203



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Sara G.02/07/2011

Is this review helpful?


Although it says you can install it yourself, I took it to my mechanic just to be save. My mechanic said it is a great product & indeed very easy to install (he still charged me $60!). Looks great on my Toyota Corolla S & serves the purpose - to install a bike rack.6753



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Dan C.01/09/2011

Is this review helpful?


Corolla Hitch/Wiring Harness Set Up Order fulfillment time was incredible, about 30 minutes. Shipping time was excellent, maybe 4 days. Packaging job was awesome. Someone had thoroughly taped things together to prevent them from moving around. Installation was very easy. You guys did a wonderful job with my order. Highly recommend working with you.5241



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Tony M.03/19/2010

Is this review helpful?


perfect fit, fast shipping Super easy to install, it's 4 bolts into the underside of the car, into holes the factory has bolts welded in. It was harder getting it out of the cardboard box it shipped in, lol. Extremly happy customer. Fast shipping too.2824



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: A. W. R.12/12/2008

Is this review helpful?


Perfect fit for vehicle Excellent design and fit. Only took about 15 minutes to install.1472



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Mike J07/01/2011

Is this review helpful?


Very simple to install. Four bolts with tapered washers screw directly into the factory threaded frame holes. All welds appear to be correct. It fits like a factory accessory.18364



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Bruce T.06/09/2011

Is this review helpful?


Just what I needed. Good price and shipped quickly. All hardware arrived as needed.16573



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: NS05/27/2011

Is this review helpful?


Draw-Tite, in my opinion, is one of a couple top of the line receiver hitch manufacturers. Based on my experience with Draw-Tite, in the past, I had no concerns ordering this hitch for my Toyota Corolla S. The fit and finish of this hitch is excellent. The welds look great and installing the hitch took me not much more then 15 mins. It is very easy to install, even without a helper, and everything lined up perfectly. With the Corolla S having the factory ground effect body moldings, on the rear bumper, I wondered how things would fit, and I can galdly say the hitch fits perfectly. A hitch like this hitch is probably the most practical and usable accessory you can add to a car. I don't plan to do a lot of towing, but I bought this so I could mount a bicycle carrier to my car, and I have no disappointments. My thanks to E-trailer for selling a great product, at a great price, fast shipping, and excellent follow-up, through the whole ordering and shipping process. I received order, payment, shipping, and delivery confirmations, via email, and if that wasn't enough, I also received an email asking me to confirm I did indeed receive my order. Top notch customer service. I would not hesitate to order from E-trailer again!15537



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Calvin05/14/2011

Is this review helpful?


Hitch installed with no problems. Simple job 15 minutes.14031



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Frank K03/29/2011

Is this review helpful?


As advertised, quick delivery,great instruction easy installation.10666



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Mojtaba Kia03/27/2011

Is this review helpful?


The hitch was as described and it was a fast and free shipping. The only gripe I have is that I had to punch out the stopper that is welded past the point of the pin hole for the ball mount receiver. Because of the length of Reese brand ball mount receiver was 1/2" longer and the hole on the ball mount receiver would not match with the hole on the hitch for the pin to be inserted for securing the attachment. One I punched out the stopper (which was very difficult) I could insert the ball mount receiver farther and line up the holes for the pin insertion. 10473



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Mike S.03/15/2011

Is this review helpful?


Order shipped quickly, and was received in good condition. Took about 15 minutes to install. Thanks E-Trailer!9400



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: John C.01/31/2012

Is this review helpful?


As others have stated great product installation was easy but definitely should come with a tap or at least the option to purchase with it as a package a wire brush just won't cut it.30750



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: sea01/07/2012

Is this review helpful?


Fit like a glove, very easy to install meaning all holes aligned nicely. I have a touring motorcycle with a popup tent trailer that I travel with. I wanted to extend my options and tow with My 2010 toyota Corolla le, which is perfect as the trailer only weights in at 400 lbs. loaded. Doing the electrical myself so didn't purchase a harness. 29249



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: don01/06/2012

Is this review helpful?


Outstanding service from "etrailer.com". Draw-Tite trailer hitch I ordered for a Corolla S came two days earlier than anticipated. The hitch fit as described by "etrailer.com" and took less time to mount than the estimate given on their website. "Etrailer.com" even sent me emails as to when the order was filled, when the order was shipped, and when the order should arrive. If every internet vendor gave great service like "etrailer.com", there would be no need to leave the house to shop. 29234



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Charles Paquette12/20/2011

Is this review helpful?


Trailer hitch arrived 3 days after ordering. It took 16 minutes to instal. looks great and works just fine. Thank you. Merry Christmas to all!28360



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Jim P10/23/2011

Is this review helpful?


Nice and heavy construction, fit very well. Could not be easier to install. Very happy with this purchase.25993



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: BobM10/04/2011

Is this review helpful?


Excellent product. Fit the car like a glove. shipped earlier than expected.25090



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Tom S.09/14/2011

Is this review helpful?


I purchased the trailer hitch especially for a bike rack as a Toyota corolla may have excellent mileage but does not have the cargo space. It took 30 minutes to install but I did stop for a phone call and a beer. I would send a picture but the fit is so perfect that you can't see it unless your on the ground. And yes, the bike rack from e-trailer is a perfect fit and of high quality. Worth the price.23928



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: John M.09/12/2011

Is this review helpful?


Great transaction. 23738



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Robin B09/02/2011

Is this review helpful?


Fit and finish are good. The weld bolts on our Toyota Corolla's frame were corroded, and needed to be cleaned up with an M12 1.25 tap before I could start the supplied bolts in them. Once that was done, the installation was a matter of minutes.23448



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Steevz08/13/2011

Is this review helpful?


Takes like 5 mins to install. Nice product, gets the job done.21824



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: JJ08/11/2011

Is this review helpful?


Well built and perfect fit. Very easy to install taking all of about 10 minutes on to my son's very new Corolla (the hitch was installed to hold a bike rack). The 19mm head metric bolts were tightened to 68 ft lbs (per instructions).21631



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Mel S.08/11/2011

Is this review helpful?


Fantastic install, using the shipping box it was a 15 minute install in 105 degree weather. Also considering 65 year old installed makes it even better. Lighting harness was also a dream to install. Great product and great instructions.21607



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Tom Smith07/07/2011

Is this review helpful?


Fast delivery and great products 18851



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: sonny m07/06/2011

Is this review helpful?


very easy to install took about 10 to 15 min. 18644



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Lloyd A06/24/2011

Is this review helpful?


This hitch is made like a tank! I am using it with a bike carrier so the hitch will outlast the car that I have it mounted on!17836



Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 - 24814

ratingratingratingratingrating by: Doug M.03/24/2011

Is this review helpful?


Great Quality, packaging, fast shipping. Install took less than 10 mins. Very nice fit and finish. Thanks10262




Ask the Experts about this Draw-Tite Trailer Hitch
Expert Answers about Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24814                                             Do you have a question about this Trailer Hitch?


  • Is there a 2 Inch Trailer Hitch Receiver Available for a 2010 Toyota Corolla
  • All of the available hitches for a 2010 Toyota Corolla have a 1-1/4 inch trailer hitch receiver opening. A 2 inch trailer hitch is not available at this time. You could use a new bike rack but you will have to make sure it is compatible with a Class I, 1-1/4 inch receiver. With a Class I trailer hitch like the Draw-Tite, # 24814, it is recommended to only carry two bikes. I would go with a very light rack so it lessens the chance of exceeding the 200 pound tongue weight capacity of the hitch.
    view full answer...

  • Installation of a Trailer Hitch on a 2000 Toyota Corolla 4 Door Sedan without Weld Nuts in Frame
  • The correct hitch for your 2000 Toyota Corolla 4 door sedan is the Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4 inch, item # 24579. This hitch utilizes existing weld nuts, on the inboard side of the vehicle frame, if present, but also includes hardware if your vehicle does not have the weld nuts in place. We have a video of the, # 24579, hitch being installed on a 1993 Prism that is essentially the same installation as your vehicle. In the case of the Prism
    view full answer...

  • Recommended Trailer Hitch to Tow a Golf Cart with a 2009 Toyota Corolla
  • The Draw-Tite Sportframe Trailer Hitch Receiver, # 24814, has a tongue weight capacity of 200 pounds and a gross trailer weight capacity of 2,000 pounds. As long as the combined weight of the trailer and the golf cart is less than that, then you will be able to tow it with your 2009 Toyota Corolla. The weight of the trailer should be on a sticker or plate on the frame and the weight of the cart should be in the owners manual or obtainable from the manufacturer. The tongue weight of a trailer
    view full answer...

  • How Much Towing Capacity do you Lose if You Use a Hitch Adapter/Extender
  • The generally accepted rule for hitch adapters is that you will lose 50 percent of your towing capacities if you use one. So if you used one on the Draw-Tite Sportframe Trailer Hitch, part # 24814, that you referenced the weight capacity would be cut from 2,000 total weight capacity and 200 tongue weight down to 1,000 total weight and 100 lbs tongue weight. I attached installation instructions for the # 24814 below for you to check out. I attached a link to an FAQ article on hitch adapt
    view full answer...

  • Bike Rack Recommendation for a Motorized Bike on a 2006 Toyota Corolla
  • You can definitely use the Draw-Tite Class I Sport Frame Hitch, # 24814, on your 2006 Toyota Corolla, and carry a bike rack. The concern will be the weight of the motorized bike. With a 70 lb bike you will be limited to one bike and that bike will need to be positioned as close to the rear of the vehicle as possible, to lessen the amount of torque placed on the hitch. Bike racks are designed for even weight distribution so adding another bike could possibly damage the bike rack, hitch or vehicle
    view full answer...

  • Trailer Hitch Recommendation for a 2004 Toyota Corolla S
  • The Draw-Tite Trailer Hitch, # 24814, is designed to fit the 2004 Toyota Corolla, sedan models. If you look at the pictures on the product page, we actually show the hitch installed on an S model. I have included a link to the installation instructions for you to view. If you plan on doing some towing, the recommended ball mount is # 3593 and you can use pin and clip # PC2. For a ball, use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). And for trailer wiring, use # 55542. I have
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com