Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Trailer Hitch - 24801

This fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.

Features:

• Custom fit is designed specifically for your vehicle
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design
• Drawbar, pin and clip are sold separately
• Made in USA

Specs:

• Receiver opening: 1-1/4" x 1-1/4"
• Rating: Class I
  • Maximum gross trailer weight: 2,000 lbs
  • Maximum tongue weight: 200 lbs
• Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24801 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

This Product Fits The Following Vehicles

2008 - 2012 Nissan Altima Coupe

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?

• Will the Draw-Tite Class I Trailer Hitch # 24801 Fit on a 2010 Nissan Altima Hybrid Coupe
  
• I spoke with my contact at Draw-Tite to be sure that the Draw-Tite Class I Trailer Hitch # 24801 will fit on a 2010 Nissan Altima Hybrid Coupe (2 door). He said that it will fit because the frame is the same on the Hybrid Model. If you have a 2010 Nissan Altima Hybrid Sedan (4 door), then the Draw-Tite Trailer Hitch, item # 24796, will fit on this vehicle.
  view full answer...


• Available Trailer Hitches for a 2003 Volkswagen Passat
  
• That other company is mistaken. There are several trailer hitches available for your 2003 Volkswagen Passat depending on the model. But the Draw-Tite Trailer Hitch, # 24801 will not fit; it is designed for a 2008 to 2010 Nissan Altima 2 door coupe. For your 2003 Passat, if it does NOT have 4Motion, you can use Draw-Tite Trailer Hitch, # 24698, Hidden Hitch, # 60991, or Curt, # 11054. I recommend the Curt Hitch, # 11054, because of the three listed, it is reported to take the least amount of t
  view full answer...


• Enlarging Frame Holes To Install Draw-Tite Class I Part 24801 on 2011 Altima Coupe
  
• The video you refer to was placed on that product page in error. It refers to a different part number installed on the sedan, not the coupe. The install would not involve drilling down through the trunk. The hole closest to the front of the vehicle would need to be enlarged enough so that the block washer and carriage bolt can be fished into the frame member. This hole can be enlarged by drilling a small adjacent hole on either side of the existing hole and using a cold chisel to remove th
  view full answer...


• Trailer Hitch and Bike Rack Recommendations for a 2010 Nissan Altima Coupe
  
• The Draw-Tite Trailer Hitch, # 24801, installs under the vehicle on the frame so it will fit a 2010 Nissan Altima Coupe with or without a spoiler. I have included a link to the installation instructions for the hitch. All of the trailer hitches for your car are Class I trailer hitches. This means you are limited to carrying 2 bikes on a bike rack compatible with a Class I trailer hitch. The platform style racks like the Swagman XC, # S64650, are very popular, and the XC is compatible with a C
  view full answer...