Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Rating: rating rating rating rating rating
6 reviews

Code: 24797

Retail:$214.96

Price:$117.95

Shipping Weight: 24 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Trailer Hitch Installation - 2007 Kia Rondo - Video

Draw-Tite Trailer Hitch - 24797

This fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.

Features:

Custom fit is designed specifically for your vehicle
Computer-aided, fully welded steel construction ensures strength and durability
Tested Tough - safety and reliability criteria exceed industry standards
Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
Lifetime technical support from the experts at etrailer.com
Black powder coat finish covers e-coat base for superior rust protection
Sturdy, square-tube design
Drawbar, pin and clip are sold separately
Made in USA

Specs:

Receiver opening: 1-1/4" x 1-1/4"
Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24797 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Trailer Hitch Installation - 2007 Kia Rondo

Video Transcript for Trailer Hitch Installation - 2007 Kia Rondo

Today we are going to install part number 24797 on our 2007 Kia Rondo. This also applies to part number 60874. Before we start our install anything we have to lower the exhaust right here. That requires taking off the rubber hanger here and the one on the backside here and there is one more towards the front. We installed this strap here so that when we bring the exhaust down it will be held in place by the straps. What we will do is spray the hangers with WD40 so that they slide off the exhaust a little easier. The other item here is the shipping bracket right here. It has to come off and stay off for the hitch install. What we need to do is take off these bolts on the end of the frame rail of these 2 and the bottom one on the drivers side.

From here we can go ahead and hang the hitch putting one end over the muffler and the other end we will put a bolt in to hold it in place. At this point you want to go ahead and install the rest of the bolts and leave them loose. Now go ahead to the other side and finish the rest of them off. With the hitch up and in place we have a little bit of play from side to side. Just make sure you can center it the best you can with that and snug the bolts up into place. Now we have the hitch the way we want it on the frame. We will go ahead and give them the final torque. Here at this point we can reinstall our heat shield and exhaust. That covers our install of part number 24797 on our 2007 Kia Rondo

This Product Fits The Following Vehicles

2007 - 2010 Kia Rondo

Customers Who Purchased This Trailer Hitch Also Bought...

Sportframe Drawbar 4" Rise 2000# Kit $21.95

Mounting Bracket 4-Pole Flat $3.19

Rubber Tube Cover 1-1/4" $4.29

Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome $7.49

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver $39.95

Customer Reviews - Write a review about this product