Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
2 reviews
Code: 24659
Retail:$205.94
Price:$109.95
Shipping Weight: 12 pounds
Shipping SpecialThis fully welded, corrosion-resistant vehicle trailer hitch is perfect for your light-duty towing and hitch rack needs. Tested Tough guarantee ensures that this hitch exceeds industry strength standards. Drawbar, pin and clip sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install part number 24659 and this also applies to part number 60833. This install will be on a 1999 Pontiac Grand Prix. So the first thing we will do is clear out the spare tire cover so we can get down to the trunk pan. Right after we ware finished with that we will take out these rubber plugs and there will be a plate that mounts over these. Now we will be enlarging the 2 existing holes in the bumper to the left and right. Hardware can be installed next using this channel right here. At this point we can go ahead and hang our hitch by the bumper bolts. After getting the hitch into position we can go ahead and get our bolts on the inside and fasten your hitch. What we will do next is install a plate that goes down here. To prevent entry of a mixture of exhaust fumes and water or what not.
We will go ahead and seal this off with some silicone sealant around the holes here. Then we go ahead and our bolts through. Next we will go back to the bottom and tighten everything back up. Alright now that we have our bolts installed we will snug them up and make sure the hitch is in alignment where we want it. At this point we can go ahead and tighten them up and give them their final torque. This was our install for part number 60833 on our 1999 Pontiac Grand Prix.
1998 - 2002 Oldsmobile Intrigue
1997 - 2003 Pontiac Grand Prix SE Sedan only
1997 - 2005 Buick Century Sedan
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 4.5 out of 5 stars (2 Customer Reviews)
by: R Jones05/21/2011
Is this review helpful?
very good product and easy to install 14967
by: Mark F.03/30/2011
Is this review helpful?
Easy and complete with good instruction for mounting. Really quick shipping!10748
Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
