4-Pole Hardwire Kit with Converter (Includes Tester)

Draw-Tite Wiring - 20251

This kit includes the 118130 converter, rated at 8.4 amps, and everything that you would need for the installation including the circuit tester.

• Adapts import and domestic vehicles with separate turn and stop lights (3-Wire System) to standard trailer taillight wiring (2-Wire System)
• 18 gauge bonded wires
• Taillight, stop and turn functions printed on wires
• Includes 4 quick-splice wire connectors
• Includes eyelet and screw for mounting the ground wire
• Includes circuit tester
• Will not work on vehicles with LED taillights

Recommended

Wiring harness mounting bracket

Replaces 18251

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Draw-Tite Wiring
Do you have a question about this Wiring?

• Is the 4-Pole Hardwire Kit with Converter, Part Number 20251 Compatible with 2001 Mercury Villager?
  
• The 4-Pole Hardwire Kit with Converter, part number 20251 would be a great choice for your Mercury Villager. The kit also includes quick splices for tapping into the existing wiring and a circuit tester for verifying your connections.
  view full answer...


• How to hook up 4-pole hardwire kit with converter on 2007 Suzuki XL7
  
• You will need to use a circuit tester to identify each of the vehicle lighting circuits. Find the left turn, right turn, stop light, running lights, and the ground. Once these wires are located, you can splice the converter into them. For your convenience, I have provided links to installation instructions and a installation video that you might find helpful. The video shows installation on a different vehicle than yours, but the procedure would be similar.
  view full answer...


• Compatability of Tail Light Converter Kit, Part # 20251 with 2006 Hyundai Elantra
  
• The 4-Pole Hardwire Kit With Converter, part # 20251 is not vehicle specific and would work great with your Elantra. The Kit also includes a circuit tester, to assist in locating the correct circuits to connect the converter. We have an online video that will assist you with the installation, I will provide you with a link below. The video shows a different converter being installed on a different vehicle than yours, but the procedure would be similar. You would access the the rear of the
  view full answer...


• Can the 4-Pole Hardwire Kit with Converter 20251 be Used With a Trailer With LEDs
  
• Yes, the 4-Pole Hardwire Kit with Converter (Includes Tester), # 20251, will work in this case. If the trailer has LEDs but the vehicle does not, it will work fine. If the vehicle had LEDs and the trailer did not, it would be a problem. The situation is that if the tow vehicle has LEDs and the trailer does not then the trailer is drawing more power than the LEDs can handle. This could result in a short, a blown fuse, or numerous other damages to the electrical systems. If the tow vehic
  view full answer...


• Can Draw-Tite 4 Pole Hardwire Kit 20251 Be Used on a 2009 Land Rover LR2
  
• Draw-Tite kit part # 20251 cannot be used on vehicles with LED tail lights. I am not sure if the 2009 LR2 uses LED lights or not. I know may Land Rover models do. The recommended kit for a Land Rover LR2 is part # 119176 or part # 11976KIT. These harness parts run a direct power wire to the vehicle battery so they can be used on vehicles incandescent tail lights or LED tail lights.
  view full answer...