Yes, the replacement lid for the # 20099 breakaway kit, part # 20106, does include the charging circuit board, attached to the inner side of the lid.
You can view an image of the circuit board at the link below. view full answer...
Directly wiring the battery to the hot lead is possible, but we recommend using the charger because it will correctly maintain the battery and prevent the battery from becoming overcharged.
The battery needs to be able to hold the brakes on full for a period of 15 minutes, so keeping that battery in good condition is essential. view full answer...
The wiring on the 7-Way will not be sufficient to charge the break away battery and another battery on your sprayer. Instead, you will need to make a separate connection from the vehicle battery to the sprayer battery.
You will need to use a battery isolator # TR118665. Mounting it to the metal in the engine bay will ground it. Run a length of wire, # 10-1-1, from the positive battery terminal to one of the side posts on the isolator. Connect the center post (labeled 12V in the picture) to t view full answer...
Do you have a question about this Trailer Breakaway Kit?
