Draw-Tite Wiring - 20017
5-Flat electrical wiring connector
Fifth wire added for surge brake lockout circuit on today's newer vehicles
Fits most 4-Pole Flat Connectors
Customers Who Purchased This Wiring Also Bought...
Ask the Experts about this Draw-Tite Wiring
- 5-Flat Trailer End Connector has Six 16 Gauge Wires
- The 5-Flat Trailer End 48 Harness, item # 20017, does have 6 wires. There are two for the running lights functions - one for each side. The wire harness has 16 gauge wire and comes with wire connectors for 16 gauge wire.
view full answer...
- Wiring a U.S.A. Boat Trailer to a 9 Wire European Trailer Plug
- The 5-Way connector on your boat will be wired as follows. Green is right turn/brake, yellow is left turn/brake, brown is running lights (both sides), white is the ground or earth connection and the blue wire is the reverse lockout or reverse lights. I searched for a connector on the internet that matches your 9 wire connector and came up with nothing.
I would recommend using a circuit tester, item # 3808, and wire by function only. Have a helper activate all of the various functions that yo
view full answer...
- Wiring Options for a 2009 Chrysler Aspen Towing a Boat Trailer with a 5-Way Flat Trailer Connection
- Yes, the Tow Ready Custom Fit Vehicle Wiring for the 2009 Aspen by Chrysler, item # 118390, is the correct wiring harness for your Aspen and you will need one other item to complete the wiring to lockout the brakes on your boat trailer surge coupler.
You can go one of three ways for this wiring. The easiest way in my mind is to install the # 118390 T-One and then splice the 5-Flat Vehicle End 72 inch Wiring Harness, item # 20016, to the 4 like wires left by removing the 4-way vehicle end conn
view full answer...
- Is Function of Blue Wire on 5-Way Connector, Part # 20017, For Reverse and How to Wire To 7-way
- The blue wire will connect to the reverse light circuit on the tow vehicle, but it will also send a signal to disengage the brake actuator on the trailer when you put your vehicle in reverse. So when you are in reverse, the trailer brakes will not be engaged.
You would need a 7-way adapter like Adapter 7 Pole to 5 Pole Flat, part # A75TB.
To wire the reverse lights on your trailer, you would need to connect the power wire from the trailer reverse lights, to the blue wire on the 5-way conne
view full answer...
- How to Install The Draw-Tite 5-Flat Trailer End 48 Inch Harness # 20017 On A Trailer
- On the Draw-Tite 5-Flat Trailer End 48 Inch Harness, part # 20017, the wires are connected as follows,
White wire is ground wire
Green wire is right turn/brake
Yellow wire is left turn/brake
Brown with green tracer is right side tail lights
Brown with yellow tracer is left side tail lights
Blue wire is the reverse lockout or reverse lights
Normally on a 5-flat connector it would just have an extra blue wire for the reverse lockout feature on boat trailers with a hydraulic coupler.
view full answer...
- What are the Wire Functions for the 5-Flat Trailer End Wiring Harness, # 20017
- The 5-Flat Trailer End Wiring Harness, # 20017, is what is a called a wishbone harness. The brown wires contain the running light signal. It is split at the plug and ran to each side of the trailer so you do not have to have a jumper wire between the two tail lights. So the wire that is yellow and brown goes to the driver side for running lights, and the green/brown wire goes to the passenger side for running lights.
The all yellow wire contains left turn and brake lights. The all green wire
view full answer...
