Kodiak Disc Brake Conversion Kit, 3,500 lbs. 5 on 4-1/2"

Kodiak Trailer Brakes - 2-HRCM-10KIT

Kodiak Disc Brake Conversion Kit for most 3,500 lb. Trailer Axles

• Kit includes:
• (2) Hub/Rotors
• (2) Pair of Calipers with Pads
• (2) Brackets to mount Calipers to axle
• Fits #84 Spindle (most 3,500 lb. axles)
• Bearings, Grease Seals, Caps, and Wheel Nuts are sold separately
• Hub/rotor uses L68149 inner bearing, L44649 outer bearing
• Grease Seal: (2.565" OD, 1.719" ID) 10-19 (double lip - for ez lube)) or 58846 (single lip - standard)
• Grease Cap: (1.980") RG04-020 or RG04-040 (EZ Lube)
• Wheel Nuts: (1/2") X1023R
• Bolt Pattern: 5 on 4-1/2"
• Single piece hub rotor design

Please note: Disc brakes require a higher line pressure (1600 PSI) than standard drum brakes (1000 PSI). To achieve the pressure a brake actuator with a 1600 PSI rating is required.

2/HRCM-10KIT Kodiak Disc Brake Kit

Customers Who Purchased This Trailer Brakes Also Bought...

Chrome Trailer Wheel Lug Nut - 1/2" (Each) $0.85

Kodiak Trailer Brakes Reviews

Ask the Experts about this Kodiak Trailer Brakes
Do you have a question about this Trailer Brakes?