3-Leaf, Double-Eye Spring Kit for 2,000-lb Trailer Axles

Redline Trailer Suspension - 2-1020

Spring kit includes 4 U-bolts, 2 U-bolt plates and (2) 20-1/4" long, double-eye leaf springs for a 2,000-lb, round axle.

Features:

• Flex to absorb road shock and provide smooth ride
• Reduce wear and tear on trailer
• Ensure level ride on bumpy and uneven surfaces
• Mount to trailer frame with hangers or a hanger kit (sold separately)
• Includes 4 round U-bolts, 2 U-bolt plates and hex nuts to attach axle to springs
  • Springs seats sold separately

Specs:

• Number of leaves per spring: 3
• Spring width: 1-3/4"
• Eye diameter: 9/16"
• Spring capacity: 1,000 lbs
• Axle capacity: 2,000 lbs
• U-Bolt dimensions:
  • Length: 4-3/4"
  • Inside width: 1-7/8"
• Spring dimensions: see table

Part Number	A	B	C
1020	20-1/4"	3-3/16"	10-3/16"

Leaf springs are an integral part of your trailer suspension system. The double-eye spring is suspended at the ends by hangers that attach to its eye or, in the case of tandem-axle or triple-axle systems, into hangers in the front and rear and an equalizer or equalizers in the center. To determine the type of hangers or hanger kit you need, you must know the specific type of leaf spring you have, as well as your axle diameter and capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications.

2-1020 Double Eye Spring Kit - 1,000 lbs

Customers Who Purchased This Trailer Suspension Also Bought...

Ask the Experts about this Redline Trailer Suspension
Do you have a question about this Trailer Suspension?

• Complete Spring, U-Bolts and Tube Shackle Bolts Kit
  
• The Spring Kit for 2K Trailer Axles, part # 2-1020, includes the two sets of the 1-3/4 Round Trailer U-Bolts, part # SP01-020, two U-Bolt Plates for 1-3/4 RD Axle part # 116308, and two of the Trailer Leaf Springs, 1000 lbs 3 Leaf, part # 1020. The leaf spring is only 20-1/4 inches long. If you need a leaf spring that is 27 inches long and 1-3/4 inches wide, I recommend the Trailer Leaf Spring, part # PR427. With this spring, you would need the 2-1/2 inch Round U-Bolts, part # 175668, and the Sh
  view full answer...


• What Trailer Spindle and Hubs Go With 3-Leaf, Double-Eye Spring Kit for 2,000 Pound Trailer Axles
  
• The 3-Leaf, Double-Eye Spring Kit, # 2-1020, is designed for use on 2,000 pound axles. For 2,000 pound axles we have the Spindle 1-1/2 inch Square x 4 inch Long Stub, # SP204BT8. You would then need a hub for 2,000 pound axles and inner/outer bearings L44643. In that category, we have 3 options. First is the Trailer Hub Assembly, # 34822BX, with a 4 on 4 bolt pattern. Second, we have Trailer Hub Assembly, # 34822545BX, with a 5 on 4-1/2 bolt pattern for 8 to 10 inch wheels. Lastly, we
  view full answer...