Wallace Forge Trailer Coupler - 16137
3" Lunette Ring - Trailer Side
- Capacity: 20K
- Mounting hardware and channel bracket sold separately
Customers Who Purchased This Trailer Coupler Also Bought...
Ask the Experts about this Wallace Forge Trailer Coupler
Do you have a question about this Trailer Coupler?
- Availability of Lunette Rings Smaller than 3 Inches
- We carry a 2-1/2 inch Lunette ring that has a four hole flat mount base, item # 63023. Other than that our Lunette rings are 3 inches. We do have other couplers that bolt to your trailer tongue. I have listed them below.
Trailer Coupler 2-5/16 Adjustable (15,000 lbs) # 80281
Atwood Flat Nose Trailer Coupler, 25K # 75074
Wallace Forge Flat Mount Trailer Coupler, 25K # FC25
Flat Mount Trailer Coupler 2-5/16, 14K # FmC251614
Trailer Coupler 2-5/16 HammerBlow (12,500 lbs)
view full answer...
- Dimensions of The Replacement 3 inch Lunette Ring - 20K, item # 16137
- The width of the mounting surface of the Replacement 3 inch Lunette Ring - 20K, item # 16137, is 2-13/16 inches. The mounting holes are 5/8 inch and are 2 inches apart on center.
view full answer...
- Dimensions of the Replacement 3 Inch Lunette Ring - 20K, # 16137
- I went out to the warehouse to measure a Replacement 3 inch Lunette Ring - 20K, # 16137. The overall height of the mounting portion is 3-1/2 inches. The overall width of the mounting surface is actually 2-13/16 inches.
The center to center distance of the mounting holes is 2 inches. The holes are 5/8 inches in diameter.
From the back of the mounting surface to the end of the ring is 7-3/8 inches.
The outside diameter of the ring is 6 inches. The ring is 1-1/2 inches by 1-1/4 inches th
view full answer...
- Will a 2-13/16 Inch Wide Lunette Ring Fit in a 3 Inch Wide Channel on a Dump Trailer
- I completely understand your reservations about the gap between the ring and the channel. The Lunette Ring, # 16137, does have a mounting surface that is 2-13/16 inches wide, but it needs to be this size to fit in the 3 inch channel. All of the lunette rings that come with a channel have this small gap. The ring in question is 0.1875 inches smaller than the 3 inch opening on your channel. That would be 0.09375 inches on either side, less than a tenth of 1 inch. Once you install the ring and torq
view full answer...
- Lunette Ring # 16137 Mounting Surface Width
- I went out to the warehouse to measure a Replacement 3 inch Lunette Ring - 20K, # 16137. The overall width of the mounting surface is 2-13/16 inches.
The mounting surface needs to be this size to fit in the 3 inch channel. All of the lunette rings that come with a channel have this small gap. Once you install the ring and torque down the bolts, the channel should flex enough to take up that space.
view full answer...
- Where is the Wallace Forge Company Lunette Ring Made
- I went down the the warehouse and pulled a Lunette Ring, # 16137. Forged into the metal is the place where it was manufactured, Canton, Ohio in the United States.
view full answer...
