Draw-Tite Ball Mounts - 1420
Adjustable Ball Mounts are ideal for applications where one vehicle will be towing trailers of varying coupler heights.
Shank can be turned up or down for high or low ground clearance applications.
- Rated at 5,000 lb Gross Towing Weight
- Up to 500 lb Tongue Weight
- 2" x 2" Solid Shank
- Ball shank diameter required: 1"
- Maximum Length is 12"
- Maximum Rise is 6"
- Maximum Drop is 7-1/4"
Class III (2" x 2") Ball Mount Accessories
Customers Who Purchased This Ball Mounts Also Bought...
Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mounts?
- Do Draw-Tite Adjustable Ball Mounts # 1420 and # 1424 have Solid or Hollow Shanks
- I went out to the warehouse and pulled an Adjustable Ball Mount, # 1420. The shank is solid. The vertical portion that holds the adjustable ball mount is hollow. For Adjustable Ball Mount # 1424, I spoke with my contact at Draw-Tite and according to the design specs it, too, has a solid shank with a hollow vertical portion.
With a solid shank you will not experience much, if any, deflection of the shank when under load (500 pounds tongue weight capacity). Both of these adjustable ball mounts
view full answer...
- Adjustable Ball Mount Recommendation to Clear a Bumper and has a 9 to 10 Inch Drop
- I went out the warehouse and measured an adjustable ball mount, # 1420. The distance from the center of the hitch pin hole to the center of the ball hole is 12 inches. From the center of the pin hole to the center of the holes for the adjustable mount measures 7-7/8 inches. When in the drop position it is 3/8 of an inch above the shank. It has a maximum drop of 7-1/4 inches.
I think a better choice for you would be the Hidden Hitch Adjustable Ball Mount, # 80414. It measures 14 inches from th
view full answer...
