Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
11 reviews
Code: 13344
Retail:$285.38
Price:$153.95
Shipping Weight: 35 pounds
Shipping SpecialThis fully welded vehicle trailer hitch receiver bolts onto your vehicle's frame with no welding required. Gloss powder coat finish and WeatherTite sealed body provide superior corrosion protection.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install part number 13344 on our Chevrolet Uplander. All right, the first thing we need to do is go ahead and lower the exhaust and temporarily remove this body bracket here. At this point we can go ahead and hang the hitch on the vehicle and snug it down to the frame because we have to use the hitch as a template to drill the rest of the holes in the frame. All right, with the hitch in place we will go ahead and drill a pilot hole, and the other holes we have to drill out in the frame will be right here. We will do one on each side toward the rear of the vehicle. And on some models you do not have to drill out back here, but on this model we actually have a hole that lines up with the body mount - no, the body bracket - so we will just go ahead and use that one. The next thing we do is install a handle nut that goes into the side of the frame here. We will bring it to the direction we need to match it to the hole right here. And repeat for the other side.
Next we will reinstall our body bracket, going through the hitch to the existing well button in the frame. And now we will take these two bolts out and reinstall the exhaust bracket. All right, at this point we can go ahead and snug down all the bolts and then make sure the hitch is where we want it. You might have a little bit of movement left to right. And then we will go ahead and torque down the bolts. Now we give the bolts their final torque. All right, that covers install of part number 13344 from Curt.
2005 - 2007 Saturn Relay
1997 - 2004 Oldsmobile Silhouette
2005 - 2007 Buick Terraza
2005 - 2009 Chevrolet Uplander
1999 - 2005 Pontiac Montana All Models
2005 - 2006 Pontiac Montana SV6 All Models
1997 - 2005 Chevrolet Venture All Models
1997 - 1998 Pontiac Trans Sport Van All Models, including Montana
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 4.7 out of 5 stars (11 Customer Reviews)
by: Dan L09/05/2011
Is this review helpful?
product is high quality and arrived ridiculously quick.23593
by: ken08/29/2011
Is this review helpful?
The hitch is great. Got the custom fit wiring harness for my van and went in with ease. Would recommend this setup23050
by: Jeff08/23/2011
Is this review helpful?
Sturdy,with nice paint. Hole for receiver is a little large. Receiver hitch bangs around. Had to put pads in. Yes ,both are 2"22581
by: Cherie S07/22/2011
Is this review helpful?
I was amazed that I could find a hitch that was made for my 2000 Montana van! Still a great car with lots of miles left in her! I needed a product with a 2" receiver, and this is perfect! :-).19899
by: Dave D.06/28/2011
Is this review helpful?
Perfect fit on a 2000 silhouette. Great quality, easy install. 18056
by: Joe06/18/2011
Is this review helpful?
Video instructions are great. Super fast shipping, ordered late Tuesday after 6pm, delivered Thursday by 3pm. Easy install.17248
by: Brian05/16/2011
Is this review helpful?
Exactly as described. Install went smouthly and took about 45 minutes as indicated in the directions.14119
by: Steve S.05/04/2011
Is this review helpful?
Great product,well built and easy to in stall.12905
by: Brad N.04/05/2011
Is this review helpful?
Shipped Free quickly. packaged professionaly. Nice job.11100
by: Wayne, S.03/19/2011
Is this review helpful?
Received Trailer Hitch with fast delivery. Hitch is well made. Watched video to help facilitate installation. This hitch will take extra work (had to drill 3 holes in frame rails) but fit was excellent. I wanted a hitch with a class IV rating. Installation not as difficult as rated unless you are not mechanically inclined. I highly recommend etrailer.com !9813
by: Ronnie King12/21/2010
Is this review helpful?
Director We get fast delivery on most products. The only thing we need to be careful about is multiple items on a single order. The hitches are sometimes labeled wrong to show us the hitch number in the box is not always the same as on the label. Otherwise outstanding services and prices. Thanks4435
Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
