Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
7 reviews
Code: 13336
Retail:$271.06
Price:$145.95
Shipping Weight: 34 pounds
Shipping SpecialThis fully welded vehicle trailer hitch receiver bolts onto your vehicle's frame with no welding required. Gloss powder coat finish and WeatherTite sealed body provide superior corrosion protection.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are installing a Curt hitch, part number 13336 on a 2005 Chevrolet Uplander. First we are going to remove the rubber exhaust hangers and lower exhaust hanger bracket on the passengers side. All right, the next step, it says, is to remove the fascia, but due to previous wiring installation on this model it has already been removed. And the next step, it says, is to disconnect the lower compressor from the drivers side, but this model is not equipped with it. All right, the next step is to use a fish wire to run the carriage bolts and the spacers through the access slots in the frame rail, leaving the carriage bolt and spacer inside the frame rail until the hitch is raised into position. Now you repeat on the passengers side. Now, the next step is to lift the hitch into place and secure it with the bolt and washer.
Now that the hitch is up, pull the bolts through the frame rail that you just installed with the hitch fish wire. Be sure to reinstall the frame rails on the drivers side and the passengers side. Be sure before you tighten your hitch completely, when it is still a little loose, to move the hitch around to try to get it centered the best you can before you tighten everything up. Now that you have the hitch up and installed, it is time to reattach the fascia and the compressor, but in this model they have already been removed. When you are done installing the hitch, you have to torque all the bolts to its desired specifications in the instructions. All right, now that completes our installation of the Curt Hitch part number 13336 on a 2005 Chevrolet Uplander.
2005 - 2007 Saturn Relay
2005 - 2007 Buick Terraza
2005 - 2009 Chevrolet Uplander
2005 - 2009 Pontiac Montana SV6 All Models
Customers Who Purchased This Trailer Hitch Also Bought...
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
by: kevin w01/06/2012
Is this review helpful?
I recieved the product faster than I thought I would. The product came with all the parts necessary to install it and it was very easy to install. I would definitely recommend to all my friends and family to buy from here I will buy my next ones from here as well. I rate this with an excellent. 29182
by: Benedict V.08/08/2011
Is this review helpful?
Installation was very easy on my Chevy Uplander 2006. Took about 45 min, everything made sense, and shipping was ridiculously fast, and the attention you get after the sale is very good.21313
by: Doug D03/31/2011
Is this review helpful?
Hitch installed just as easily as the video on the etrailer website showed. Install time of about 45 minutes only because my van has the air compressor bracket that needs to be trimmed. 10857
by: Nick F03/21/2011
Is this review helpful?
Great products and everything arrived within 3 business days. Installation videos made the project a breeze. Highly recommend!9991
by: Homer O'Neal03/11/2011
Is this review helpful?
I recieved my hitch much sooner than I expected. Installation was very easy.Took me only 30 min. {and I am 72 years old} took longer to gather the tools than to do the job. Thanks so much for a great product and lighting fast service.I will be ordering again. Thank you, Bud O'Neal 9121
by: Don S03/09/2011
Is this review helpful?
Service was quick and friendly. Hitch is quality build and easy to install. 8894
by: Alfred T.03/16/2009
Is this review helpful?
I installed it in 25 minutes Very easy to install thanks to your video. Thanks1652
Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?
Installation Details
