See What Fits Your Vehicle
customer service | view cart  View Cart

Custom Fit Trailer Hitch


13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223Trailer Hitch 13223

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch

Rating: ratingratingratingratingrating
5 reviews


Code:   13223

Retail:$271.06

Price:$145.95

Shipping Weight: 34 pounds

Shipping Special
Quantity: 




Curt Trailer Hitch - 13223

This fully welded vehicle trailer hitch receiver bolts onto your vehicle's frame with no welding required. Gloss powder coat finish and WeatherTite sealed body provide superior corrosion protection.

Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • WeatherTite construction prevents interior rust by sealing main body
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 500 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13223 Curt Class 3 Trailer Hitch Receiver



Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video hitch install mitsubishi montero
Trailer Hitch Installation - 2003 Mitsubishi Montero Sport
Video Hitch install 2001 Mitsubishi Montero
Trailer Hitch Installation - 2001 Mitsubishi Montero Sport
Video hitch installation 2001 mitsubishi montero sport
Trailer Hitch Installation - 2001 Mitsubishi Montero Sport

Video Transcript for Trailer Hitch Installation - 2003 Mitsubishi Montero Sport

Today we are going to install part number 13223 from Curt, and we are going to install this on a 2003 Mitsubishi Montero Sport. We will show you where the hitch mounts up on the frame. It reuses these existing holes where these bolts are right now. This tie-down hook actually gets taken off the vehicle and left off, and it is going to be the same thing on the passengers side, where this tie-down loop will get taken off as well. And these pieces will stay off the vehicle. Also, we did take down the spare tire, just to get a little easier working room, and the spare tire will go back up in its place when we are done. All right, when you take this down, there is a threaded fitting here which the hitch uses, too. We are going to take some time here and actually clean that out really good. Spray it down with some lubricant and run the bolt in and out. Sometimes, in an aged vehicle, you may have to run a tap through it to clean it out.

All right, now at this point we can go ahead and start installing the hitch. And we will install the hitch using the bolts and the holes that we just cleaned out the threads in. All right, and we just slip in our bolts. We have a long bolt the flat washer will go up, and just put the nut on top, just enough to get it started. When the drivers side is done, do the same thing on the passengers side. All right, now that we have got all our bolts started, let us go ahead and snug them down. Torque them down to the specified torque ratings in the instructions. OK, with the hardware installed, the only thing that is left over is to put the spare tire back up. And that covers our install of part number 13223 from Curt, on our 2003 Mitsubishi Montero Sport.


This Product Fits The Following Vehicles

1997 - 2004 Mitsubishi Montero Sport




Customers Who Purchased This Trailer Hitch Also Bought...






Customer Reviews  -  Write a review about this product

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - 13223

Average Customer Rating:  ratingratingratingratingrating4.8 out of 5 stars   (5 Customer Reviews)




Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - 13223

ratingratingratingratingrating by: T.HARE04/05/2009

Is this review helpful?


PERFECT FIT AND LOOKS GOOD TOO BOLTED RIGHT UP TO ORIGINAL HOLES AND LOOKS AND WORKS GREAT.VERY EASY TO INSTALL1710



Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - 13223

ratingratingratingratingrating by: Bill M01/09/2012

Is this review helpful?


Great fit, awesome videos, quick shipping. Can't ask for more.29328



Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - 13223

ratingratingratingratingrating by: Paul Z.10/21/2011

Is this review helpful?


Hitch is well suited for my vehicle. It took less time than I had anticipated (less than 1 hour) to install. Only problem is that the bolt closest to the back on the passenger side is too long and had to use the existing bolt.25941



Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - 13223

ratingratingratingratingrating by: Michael H.06/22/2011

Is this review helpful?


Was able to install within about 30 minutes and it matched up perfectly. Had to drop spare tire down long enough to bolt hitch on and then raise the spire tire back up. Perfect fit.17675



Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 - 13223

ratingratingratingratingrating by: Derek C06/09/2011

Is this review helpful?


Curt Hitch was easy to install on 03 montero sport. Lights were the most difficult but not too bad. Looks great, hope it works just as well!16622




Ask the Experts about this Curt Trailer Hitch
Expert Answers about Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13223                                             Do you have a question about this Trailer Hitch?


  • Do You Need To Remove Spare Tire When Installing Curt Hitch, # 13223, On 2000 Mitsubishi Montero
  • There should be no problem with your automatic transmission when towing as long as the transmission is in good working order and you stay within the towing capacity that is recommended for your 2000 Mitsubishi Montero Sport. Anytime you are towing you should always check the owners manual or the car dealer for the GCVWR (Gross Combined Vehicle Weight Rating). The GCVWR is the weight capacity for your vehicle, which includes the vehicle, trailer and the contents. On the Curt Class III Trail
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com