Tow Ready Circuit Protected ModuLite Vehicle Wiring Harness with Hardwire Kit (Includes testers)
Features:
- Short circuit protection safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations
- Virtually eliminates draw on the vehicle's taillight circuit
- Taillight circuit has been upgraded to work with vehicles using PWM, allowing converter to turn on fully giving trailer maximum light brightness
- Powers the trailer's stop, turn, tail and running lights directly from the tow vehicle's battery
- Unit prevents feedback from trailer to vehicle system
- May be used on 2 and 3 wire systems
- When used on 2 wire systems, brake wire on harness must be grounded
- Adapts a 3 wire system on the towing vehicle to a 2 wire system on the trailer
- Will work on vehicles and trailers with either LED, incandescent, or standard bulb taillights
- Works with most vehicles multiplex wiring systems for lighting
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or: Max. stop/turn light: 2.1 amps per side. Max. tail lights: 5.6 amps. Read vehicle's owners manual and instruction sheet for additional information
Included with Hardwire Kit:
- Modulite Wiring Harness (119176)
- Modulite Install Kit (118151)
- 20' of 12 gauge wire, ring terminals, and inline fuse for battery connection
- Circuit tester
- To help find wires behind vehicle taillights to gather signals
- (5) Scotch Locks
- Makes tapping into wires quick and easy
- LED 4 Pole Cover with Tester
- Protects 4-pole connector from the elements and lets you know everything is working properly
119186 Circuit Protected ModuLite Protector with Hardwire Kit
See Larger
Instructions
