Tow Ready Custom Fit Vehicle Wiring - 118436
Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the driver's side taillight. The 4-pole trailer connector will be stowed in the trunk when not in use.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (4.2 amps)
Read vehicle's owners manual and instruction sheet for additional information.
This Product Fits The Following Vehicles
2006 - 2007 Honda Accord 2 Door
Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...
Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
- Installation of Wiring Harness for 2007 Honda Accord 2-Door
- Yes, we have a video (see link) of a wiring harness install on a 2006 Honda Accord. The 2006 model does not have the panel on the drivers side that your 2007 model has and I believe this is where you are getting held up. You will have to open the trunk and remove the threshold panel and partially remove the felt trunk liner on driver’s side, exposing the taillight wiring. This should get you to where you need to be to connect the T-One Wiring harness, item # 118436, in line with your vehicles ta
view full answer...
Installation Details
