See What Fits Your Vehicle
customer service | view cart  View Cart

Custom Fit Vehicle Wiring


 118417  

T-One Vehicle Wiring Harness

Tow Ready Custom Fit Vehicle Wiring

Rating: ratingratingratingratingrating
14 reviews


Code:   118417

Retail:$27.05

Price:$16.95

Shipping Weight: 1 pounds

Shipping Special
Quantity: 




Tow Ready Custom Fit Vehicle Wiring - 118417

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
  • Provides a 4-pole flat trailer connector for the vehicle
  • Quick and Easy
  • No Cutting, Splicing or Taping
  • Just Plug in the T-One Connector and You're Ready to Tow
  • Solid One Piece Construction
  • 16 Gauge Bonded Wire w/ 4-Flat Plug
  • "Factory" Appearance
  • Connector is Equipped with a Circuit Protected Taillight Converter
  • Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Single connection point is located behind the passenger side taillight. Trunk access is required to install the connector, but the 4-pole wiring harness will be stowed under the vehicle.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
Warning:
Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
  • Max. stop/turn light: 1 per side (7.5 amps)
  • Max. tail lights: (7.5 amps)
Read vehicle's owners manual and instruction sheet for additional information.




Video of T-One Vehicle Wiring Harness


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video wiring install 2007 chevy impala
Trailer Wiring Harness Installation - 2007 Chevrolet Impala
Video wiring install 2007 chevrolet impala
Trailer Wiring Harness Installation - 2007 Chevy Impala

Video Transcript for Trailer Wiring Harness Installation - 2007 Chevrolet Impala

Today we are going to install part number 118417 from Tow Ready. We are going to install this on a 2007 Chevrolet Impala. To install the T-1 connector, we have to get back behind the tail light assembly here and behind this plastic. We are also going to be taking off the passengers side tail light, too. And this whole panel will just pop up straight vertical. And we are going to take off this other wing nut right here. Now that we have got our tail light loose, we are going to just temporarily disconnect it from the wiring harness. And then this actual plug right here is where our T-1 connector is going to hook up to the vehicle. We will reconnect the T-1 connector back in, and just tuck that back between the bumper fascia and the body. And we are also going to take our 4-pole wire, and we are going to route that straight down, because that is going to come out by the hitch itself. Make sure to leave that ground wire, because we are going to attach it to the sheet metal below the tail light. And we will just clip our original wire harness back on.

All right, our next step is to go ahead and reattach our tail light assembly. From the bottom of the vehicle, we will reach up and pull out our wire harness. Just get a grip on it. We will actually push it back up and over this bumper support to keep it away from the exhaust. What we can do is just go ahead and simply zip-tie it to the hitch. All right, and then we will take our 4-pole flat and secure it to the chain loop right here. All right, and one final check to make sure your wires are not pinched or rubbing against anything, and then you are pretty much set up and ready to go. And that covers it for our install of part number 118417 from Tow Ready on our 2007 Chevrolet Impala.


This Product Fits The Following Vehicles

2006 - 2012 Chevrolet Impala




Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...






Customer Reviews  -  Write a review about this product

T-One Vehicle Wiring Harness - 118417

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (14 Customer Reviews)




T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Terry C01/06/2012

Is this review helpful?


This product is the best. The instructions are clear and precise. I did review your video on your web page before purchasing this, but that video sold me on this product. My Installation time was less than 10 minutes. 29211



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Mike S10/05/2011

Is this review helpful?


Order came very fast.Made the job quick and east25101



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: George Mozader07/13/2011

Is this review helpful?


Product is very sturdy. shipping was very fast,supprisling fast. wiring harness was easily hooked up. very well pleased.19366



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Stan M07/06/2011

Is this review helpful?


I installed a T-One wiring harness . It was very easy to do and works perfectly.18659



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Jake B.06/24/2011

Is this review helpful?


shipped the same day. Good instructions on website. 100% satisfied. 17816



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Mike M06/23/2011

Is this review helpful?


Excellent hitch,built very solid. My 14year old son and his friend did a total install, including wire harness in about 30 minutes. The whole transaction, including shipping was fast and smooth. Hitch is almost invisable on a 2006 Impala.17741



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: JARED W.06/20/2011

Is this review helpful?


I was able to install this on my car in about 15 mins so it's very nice and easy to hook up. Very pleased with the product. Didn't have to pay somebody lots of money to hook up my trailer lights. 17296



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: JH06/13/2011

Is this review helpful?


Simple 16900



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Paul Kriegh06/11/2011

Is this review helpful?


SQE Simple,Quick,Easy Good service and NO Problems. Just how I like to ROLL. That's the TRUTH ! Really ! Go spend some money here,help America Out. Sincerely Capitalist Nationalist Republican Paul Kriegh Newalla Oklahoma.16750



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: jimmy b05/16/2011

Is this review helpful?


Good Morning, this product was easy and complete . Instalation took no more the 15 min and everything worked just fine. 14400



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: amiel l kalgren05/14/2011

Is this review helpful?


works fine 14002



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Jeremy Bishop04/21/2011

Is this review helpful?


Great product, saved me a ton of time! Better then the product was the company. I do a lot of purchasing online and Etrailer is the best company I have ever done business with. Great Job Etrailer!12119



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Joe L.03/24/2011

Is this review helpful?


This harness fit perfectly and worked c orrectly.10255



T-One Vehicle Wiring Harness - 118417

ratingratingratingratingrating by: Anyce03/21/2011

Is this review helpful?


It took about 2 minutes to install this harness after watching the video that was very helpfull.9939




Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Expert Answers about T-One Vehicle Wiring Harness - 118417                                            Do you have a question about this Custom Fit Vehicle Wiring?


  • Is there a T-Connector Wiring Harness for a 2001 Chevrolet Impala
  • Unfortunately, at this time a plug-in wiring harness is not available for the 2001 Chevrolet Impala. To wire your vehicle for towing, you would use a 4-way Connector, part # 18002. This connector would wire directly into the lighting circuits behind your taillight assemblies. The easiest way to locate the correct circuits would be to use a circuit tester, such as part # 40376. Start grounding the white wire from connector to the vehicle. Next, activate the left turn signal, then use the circuit
    view full answer...

  • What Trailer Hitch And Wiring Harness Is Recommended For A 2005 Chevrolet Impala
  • I would recommend the Draw-Tite Class II 1-1/4 Inch Hitch # 36407, or the Hidden Hitch Class II 1-1/4 Inch Hitch # 90137. They are the same hitch, the only difference is the Hidden Hitch part includes the ball mount # 36061. Both hitches are a Class II hitch with a 3,500 lbs. towing capacity and a 300 lb. tongue weight capacity. I am sending a link to the installation instructions on the hitch. If you will be towing with the hitch you will also need a hitch ball like the Tow Ready 2 Inch Hitc
    view full answer...

  • Recommend Correct Trailer Wiring For My 2010 Chrysler Sebring
  • For the correct wiring for your 2010 Chrysler Sebring, you would need Draw-Tite Custom Fit Vehicle Wiring, part # 118444, which plugs in-line with your tail light wiring connectors and connects to your battery via included fuse. The item you selected, T-One Vehicle Wiring Harness, part # 118417 is designed to fit the 2006-2011 Chevrolet Impala. The item you referred to, 4-Pole 60 Inch Long Vehicle End, part # 18002, will not work for on your Chrysler Sebring as it has a 3-Wire System which
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com