T-One Vehicle Wiring Harness with 4 Pole Trailer Connector for Factory Tow Package

Tow Ready Custom Fit Vehicle Wiring - 118381

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle with factory tow package
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection point is located under the vehicle, behind the bumper on the driver's side. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: (7.5 amps)
• Max. tail lights: (7.5 amps)

Read vehicle's owners manual and instruction sheet for additional information.

Video of T-One Vehicle Wiring Harness with 4 Pole Trailer Connector for Factory Tow Package

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Which T-One Wiring Harness Fits a 2004 Toyota Sienna Van?
  
• The T-One is a custom fit wiring harness, I am sorry, but part number 118381 will not fit your 2004 Sienna Van. This harness is custom fit for a full-sized Dodge van. We do offer a custom harness for the Toyota Sienna Van, the T-One wiring harness you need is part number 118304. For your convenience, I will attach links to the referenced products and some helpful FAQ wiring pages.
  view full answer...


• How to Wire a Itasca Navicon Motorhome with Valley 7-Way Wiring for Flat Towing a Jeep
  
• Part # 118381 does not have a converter built in. Parts are tricky to select when dealing with motorhomes built off of production chassis. Itasca may have had a certain number of chassis built by Dodge with different wiring for their purposes. The parts we carry like 118381 are designed to be used with the production models sold at dealerships. Fotrunately for you, Itasca teamed up with Valley and have provided you with a 7-Way connector and what ever converting needed to be done has already
  view full answer...


• Which Trailer Wiring Harness Should I Get for my 2008 Jeep Liberty, # 118455 or # 118381
  
• Both the Tow Ready Custom Fit Vehicle Wiring for the 2008 Liberty by Jeep, part # 118381, and the Draw-Tite Custom Fit Vehicle Wiring for the 2008 Liberty by Jeep, part # 118455, will work on a 2008 Jeep Liberty. The difference is that the #118455 is used on vehicles that do not have a tow package, and the #118381 is for Libertys that have a factory 7 way and want a way to have a 4 way connector as well. If your Jeep Liberty does not have a tow package you will want to use the # 118455 kit
  view full answer...


• Electric Trailer Brake Controller and 7-Way Wiring Recommendations for a 2000 Dodge Dakota
  
• For your 2000 Dodge Dakota, I recommend the Tekonsha P2 Brake Controller, # 90885. This is the latest in the popular Prodigy series of brake controllers and it is easy to use and set up. I have included a link to the installation details below. If the 7-Way on the trailer has blade style connectors, you will also need to add a 7 and 4 Way Installation Kit, # ETBC7. You will plug your existing 4-Way into the back of the ETBC7. The remaining 4 wires will need to be hardwired. White gets grounde
  view full answer...


• Which Trailer Wiring Harness Fits a 2004 Jeep Grand Cherokee Laredo with Factory Tow Package
  
• In 2004, the Jeep Grand Cherokee either came with a factory installed 7-Way harness at the rear of the vehicle or no trailer connector. The towing prep package may not necessarily include the 7-Way but it could still have the tow package. This sounds like the case for your vehicle. Since it states that it has the towing package, then you will need Tow Ready Custom Fit Vehicle Wiring, # 118381, that you have referenced. You will need to locate the factory wiring harness behind the bumper on th
  view full answer...


• Correct Tow Wiring Harness for 2008 Jeep Liberty
  
• If your Liberty was equipped with the tow package, it will have the 7-way trailer connector on the rear of the vehicle. Part # 118381 would plug inline with the wiring harness leading to the 7-way. Since you do not have the factory hitch, you probably do not have the tow package and would want to use part # 118455. Installation is pretty simple. Access the rear of the tail light assemblies, plug the connectors inline with the existing connections behind the tail lights, and run the power wire
  view full answer...


• How Do I Install a 5-way Flat Connector at the Back of my 2006 Jeep Commander to Tow my Boat
  
• In order to have a 5 pin flat trailer connection you will first need to install the Tow Ready Custom Fit Vehicle Wiring, part # 118381, that you referenced. I attached installation instructions and a link to an installation video for this product below for you to check out also. The next thing you will need is an Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, part # 20036. This adapter will plug into the 4-way that you just installed with the # 118381, and then you can run the blue wire to
  view full answer...


• Troubleshooting Trailer Lights Not Working with Wiring Harness # 118381 on a 2002 Dodge Durango
  
• First, in order to use Trailer Wiring Harness, # 118381, your 2002 Dodge Durango will need to be equipped with a factory tow package. If it does have a factory tow package, check the owners manual to find the fuses and/or relays related to the tow package to determine if anything is missing or needs to be replaced. If the Durango does not have a tow package, you will need to use a different wiring harness, # 118334. This harness plugs in line with the vehicle tail light wiring. I have include
  view full answer...


• Wiring Options for Flat Towing a 2002 Jeep Grand Cherokee Behind a 1986 Gruman/Olsen Delivery Van
  
• The T-One Vehicle Wiring Harness, # 118381, that you have referenced cannot be used in a reverse type of application like you are describing. But there are numerous lighting options for flat towing a vehicle that will work for you. The right wiring application for you will depend on several factors. There are basically two types of wiring solutions for flat towing. Permanent solutions and temporary solutions. If you plan on towing the 2002 Jeep Grand Cherokee often, you would benefit from a p
  view full answer...


• Parts Needed to Add a 7- and 4-Way Trailer Connector to a 2002 Dodge Ram 2500
  
• If your Ram has the square plug for the wiring harness, you could use the Multi-Plug T-One Connector Assembly, # 20135, to add a 4 and 7-Way connector. If you have a different wiring situation, to add a 7-Way and 4-Way trailer connector to your 2002 Dodge Ram, you will need to use # 37185. You will need to plug in the existing 4-Way that you have on the truck into the 37185. You will then need to ground the white wire to the truck frame. The purple wire is for reverse lights on the traile
  view full answer...