Wiring Harness Installation - 2000 Dodge 1500 Van - Video
Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: T-One connection point is located under the vehicle, behind the bumper on the driver's side. The 4-pole trailer connector will be stowed under the vehicle, close to the trailer hitch when not in use. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn/tail light: 7.5 amps per circuit
Read vehicle's owners manual and instruction sheet for additional information.
Replaces # 18368
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
plug and play, very very easy
Stephane G. from Quebec, Canada
You just unplug the old wiring and plug in the new. It took longer locating the plug than the installation itself. The connectors were as good quality the the Dodge original. Great product
Instructions