T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118367

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: One connection point is located underneath the truck, next to the driver's side frame rail. This connector will have a cap on it that will need to be removed. The other connection point is in between the battery and the fender under the hood of the truck. The 4-way trailer connector will be stowed under the vehicle. A mounting bracket is recommended.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• 7.5 amps per circuit

Read vehicle's owners manual and instruction sheet for additional information.

Replaces # 18367

This Product Fits The Following Vehicles

2000 - 2000 Toyota Tundra All Models

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring

Do you have a question about this Custom Fit Vehicle Wiring?