T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118362

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection point is located underneath the truck bed along the passenger side frame rail. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: 1 per side (2.1 amps)
• Max. tail lights: (4 amps)

Read vehicle's owners manual and instruction sheet for additional information.

This Product Fits The Following Vehicles

1998 - 1999 Nissan Frontier

1998 - 1998 Nissan Quest

2000 - 2004 Nissan Frontier 2 Door only

2000 - 2004 Nissan Frontier 4 Door only

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Will the # 118362 T-One Vehicle Wiring Harness Fit a 2003 Nissan Frontier Dessert Runner
  
• Yes, the T-One Vehicle Wiring Harness, # 118362, will fit the 1998 - 2003 Nissan Frontier all models including the Dessert Runner.
  view full answer...


• Where does the Loose White Wire Go on T-One Harness 118362 for a 2002 Nissan Frontier
  
• The loose white wire, with the eye ring terminal, should be connected to the frame of your Frontier. That is the ground. It is directly connected to the white wire on the other side of the box. I have linked to the instructions below for you to review. I have also linked to a video of the harness being installed on a 2003 Frontier. Follow the instructions and use the video as a guide. The white wire on the output side does not need to be altered. Just connect the black connector to your trai
  view full answer...


• Wiring a 7-Way Trailer Connector on a 2006 Nissan Frontier
  
• In order to determine the wiring functions of the factory wiring on your 2006 Nissan Frontier, you will need to test them with a circuit tester like # 3808. Someone will need to sit in the truck and turn on and off the lights, blinkers, and so on while you test the wires. Once you have determined the color/function of each wire, you can wire in the new 7-Way as follows. If looking at the BACK of the 7-Way where the wires attach: 1 oclock position = running lights 3 oclock position = left
  view full answer...


• Troubleshooting Trailer Lights Not Working on a Trailer Towed by a 2000 Nissan Frontier
  
• You can test to see if the T-One Vehicle Wiring Harness, # 118362, is bad. First, with no trailer connected, use a circuit tester like # 3808 to test the pins on the 4-Way. If they do not work when you run through the lighting functions, then there is a problem on the truck side. You can also check to make sure that all fuses/relays related to trailer towing are intact. Use your vehicle owners manual to find the location of those fuses or relays. Make sure that the white ground wire on th
  view full answer...


• Recommend Correct Wiring Harness For Trailer With Multiple Lights
  
• You would need to determine the total amperage draw for the lights on the trailer. Typically each incandescent light will draw about 2 amps, and each marker light 0.5 amps. If you are having problems with amperage, I would recommend upgrading to the Tow Ready Upgraded Circuit Protected Modulite, part # 119176KIT. This wiring kit actually draws power directly from the vehicle battery and will protect against overloading vehicle wiring. The other option would be to replace the lights on your
  view full answer...