T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118360

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection points are located behind the vehicle taillights. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: 1 per side (2.1 amps)
• Max. tail lights: (4 amps)

Read vehicle's owners manual and instruction sheet for additional information.

This Product Fits The Following Vehicles

1998 - 2000 Isuzu Amigo

2002 - 2002 Isuzu Axiom

2001 - 2003 Isuzu Rodeo Sport

1998 - 2002 Honda Passport with Door Mounted Spare

1998 - 2004 Isuzu Rodeo with Door Mounted Spare

1998 - 2002 Honda Passport with Under Vehicle Spare

1998 - 2004 Isuzu Rodeo with Under Vehicle Spare

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Lights for towing a 1998 Isuzu Amigo Behind My Motorhome
  
• You will need a wiring kit to control the vehicle lights while in tow, the kit you selected is for towing a trailer with the Amigo not for towing the Amigo behind your RV. You can use the #38955 tail light isolating kit which will wire to the vehicle tail lights, and you will need a converter # 118158 because your vehicle has separate turn and brake lights. Another option is to use the light kit with bulbs, RM-155 which will use a separate bulb in the tail light housing and will eliminate splici
  view full answer...


• Where are the Connection Points for Trailer Wiring Harness # 118360 on a 1998 Isuzu Rodeo
  
• You are correct about how to install the T-One Vehicle Wiring harness, # 118360, on your 1998 Isuzu Rodeo. The connector on the harness with the yellow wire plugs in line with the driver side tail light wiring behind the tail light. The connector with the green wire does the same on the passenger side. Installation will be as quick and easy as adding trailer wiring can be. I have included a link to the installation details for you to view.
  view full answer...


• Tow Ready Custom Fit Wiring Recommendation for a 1999 Isuzu Amigo
  
• This Tow Ready Custom Fit Vehicle Wiring, # 118360, would be the correct wiring kit for your 1999 Isuzu Amigo. Most likely the 5x8 utility trailer that you are renting will have a 4-way connector that will plug right into the 4-way trailer connector from the # 118360. I attached installation instructions for this product for you to check out also. You may also be interested in the following products to complete your tow setup: Draw-Tite Trailer Hitch # 36247 (installation instructions a
  view full answer...


• Can the T-One Vehicle Wiring Harness for a 1999 Honda Passport be Used with LED Lights on a Trailer
  
• You will not need to use any other converter or adapter on your 1999 Honda Passport or trailer to power the trailers LED lights using the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118360. The wiring harness and vehicle electrical system support LED trailer lights. I have included a link to the installation details for you to view.
  view full answer...