Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection point is located along the inside of the left rear frame rail. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: (7.5 amps)
- Max. tail lights: (7.5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
1998 - 2004 Chevrolet S-10 Pickup With Rear Fascia and No Step Bumper
1998 - 2004 Chevrolet S-10 Pickup with Sportside Box and Non-Towing Bumper
1998 - 2004 Chevrolet S-10 Pickup with Standard Box and Step Bumper
1998 - 2004 Chevrolet S-10 Pickup ZR2 Pkg. and Highrider
1998 - 2004 GMC S-15 and Sonoma Pickups With Rear Fascia and No Step Bumper
1998 - 2004 GMC S-15 and Sonoma Pickups with Sportside Box and Non-Towing Bumper
1998 - 2004 GMC S-15 and Sonoma Pickups with Standard Box and Step Bumper
1998 - 2004 GMC S-15 and Sonoma Pickups ZR2 Pkg. and Highrider
1998 - 1999 Isuzu Hombre With Rear Fascia and No Step Bumper
1998 - 2000 Isuzu Hombre With Step Bumper
Instructions