Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
16 reviews
Code: 118356
Retail:$27.05
Price:$24.95
Shipping Weight: 1 pounds
Shipping SpecialTow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
Installation: Connection points are located underneath both rear corners of the vehicle behind the protective covers. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
Video of T-One Vehicle Wiring Harness with 4 Pole Trailer Connector
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install part number 118356 from Tow Ready, and we are going to install this on a 1996 Jeep Wrangler. OK, we will start off by positioning our 4-pole flat behind the hitch, and we are just going to leave it loose like that for now. And we will run our wires to the drivers side and the passengers side. Starting with the passengers side, which will be the green and white wires, we are going to run it behind the hitch itself, because there really is not anywhere else where you can hide the wiring on this particular vehicle. So, it is going to take quite a few zip-ties to hold everything in place. And our junction point will be up here, behind this plastic here, approximately in this area here. All right, we will just take down this plastic right here.
The connection is underneath all this tape right here, so we have got to take this tape off and disconnect the two halves. And it is kind of difficult to see, but once you get the two halves disconnected, the T-1, and it snaps into place. And the other half will go back inside of here. Next what we will do is we will take our ground wire and run it right to the side of the frame and attach it right there. OK, we want to put our plastic cover back together in the vehicle. All right, and we will repeat the same process on the other side of the vehicle, on the drivers side. And put our plastic cover back into place. With the wires properly zip-tied, that will finish your install of part number 118356 from Tow Ready on our 1996 Jeep Wrangler.
1997 - 1997 Jeep TJ
1991 - 1997 Jeep Wrangler
1991 - 1995 Jeep YJ
Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
by: Jim J.05/03/2011
Is this review helpful?
This works just like they say, it has with a video that shows just how to do it. This is a quality product, no wire cutting or twisting, it just plugs in and works. 12805
by: mike j01/16/2012
Is this review helpful?
simple hook-up just as described. longest amount of time was access to the wiring connectors.29767
by: Dave G01/15/2012
Is this review helpful?
Very easy to install! worked fine for me 29752
by: Peter B09/12/2011
Is this review helpful?
Hooked up with ease. Thanks for the video instructions.....23750
by: Frank DeCaro07/22/2011
Is this review helpful?
I had priced a few businesses about installing this wiring harness for my trailer on my 92 Jeep and the cheapest one was over $100. I found etrailer online and found the harness for $24.99 and it was here in three days and took about 15 minutes to install myself with very easy instructions to follow and works perfectly. Thanks etrailer for saving me cash and making my experience a great one!!! 19898
by: John H07/06/2011
Is this review helpful?
just recieved the item have not connected it yet18739
by: Len Olenik05/23/2011
Is this review helpful?
Easy to install and the connectors are OEM quality.15099
by: Tim T05/20/2011
Is this review helpful?
Very impressed with etrailer. I found everything i needed for a great price and delivery was fast. I will definitely order from them again. 14943
by: Holly M.05/20/2011
Is this review helpful?
Wow!! I ordered it and the 2nd day it was on my porch that's really quick. My husband put it on our Jeep that night. Your products are made tough and good Thank-you very much we will keep you in mind for anything eles we might need. Thank-you14875
by: Rich S.05/17/2011
Is this review helpful?
Excellent product. Easy to install on my 1991 Wrangler YJ.14614
by: Nate M.05/16/2011
Is this review helpful?
I ordered a wiring harness for my jeep. Installing was fast and easy. The harness comes with instructions and all the parts you 'll need.14187
by: Jim J.05/03/2011
Is this review helpful?
This works just like they say, it has with a video that shows just how to do it. This is a quality product, no wire cutting or twisting, it just plugs in and works. 12804
by: Hadlley02/25/2011
Is this review helpful?
Great service and a great product!!!!! 5 Stars7893
by: Don R.06/27/2009
Is this review helpful?
Easiest light wiring ever. I've wired a lot of trailer light plugs in my time, but this was without a doubt the easiest I have ever done; once it was plugged in it was ready to go. And the shipping time was awesome.2058
by: Jose04/17/2009
Is this review helpful?
Very easy to install Everything that came in the packages was exactly what I needed. It helped to watch the installation video on youtube. Thanks 1758
by: angel04/14/2009
Is this review helpful?
super fast use fast use and perfect for jeep1743
Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?
Related Products...
Installation Details
