Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the interior trim panel close to the driver side taillight. The 4-pole trailer connector will be stowed in the rear cargo area when not in use.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (4 amps)
Read vehicle's owners manual and instruction sheet for additional information.
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
2005 - 2005 Chevrolet Venture All, Including AWD
1997 - 2004 Chevrolet Venture Mini Van, All Models
1997 - 2004 Oldsmobile Silhouette
1997 - 2004 Oldsmobile Silhouette Mini Van, All Models
2005 - 2005 Pontiac Montana All, Including AWD
1999 - 2004 Pontiac Montana Mini Van, All Models
1997 - 1998 Pontiac Trans Sport Van All, Including Montana
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
easy
john from ohio
it was so easy evan a cave man can do it
See Larger
Instructions