T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118344

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection points are located behind the vehicle taillights.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: (7.5 amps)
• Max. tail lights: (7.5 amps)

Read vehicle's owners manual and instruction sheet for additional information.

This Product Fits The Following Vehicles

2003 - 2004 Lincoln Aviator

1997 - 2002 Ford Expedition

2002 - 2003 Ford Explorer Sport Trac

1998 - 2002 Lincoln Navigator

2000 - 2003 Ford Ranger

2001 - 2003 Ford ZX2

2001 - 2003 Ford Explorer 2 Door

2002 - 2003 Ford Explorer 4 Door

2002 - 2003 Mercury Mountaineer 4 Door

1995 - 2003 Ford Van All Full Size Models including Superwagon

1997 - 1997 Ford Aerostar Extended Body

1997 - 1999 Ford Escort Sedan

1997 - 1999 Mercury Tracer Sedan

1997 - 1997 Ford Aerostar Standard Body

2000 - 2003 Ford F-150 Stepside Models

1997 - 1999 Ford F-150 and F-250 Light Duty Stepside Models

2004 - 2004 Ford F-150 Heritage Series Stepside Models

2001 - 2003 Ford F-150 SuperCrew Cab

2000 - 2002 Ford Focus Wagon

1998 - 2000 Ford Escort ZX2

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Recommended Trailer Harness for 2003 Ford F-150
  
• If your 2003 Ford F-150 came from the factory with the 4-Way flat connector, then your truck already has a towing package wired in. In this case I would recommend 7-Way connect part # 118242. A 7-Way will allow you to tow trailers with 7-Way wiring systems and brakes. You can still use it with 4-Way trailers by using an adapter like part # 47345. Built into this adapter is a circuit tester to make sure truck wiring is hooked up properly. If you strictly want to use a 4-Way, then the part wou
  view full answer...


• Wiring adapter for brake controller on 2000 Ford Expedition
  
• You should only need one of the wires on the 6 pole connector to hookup your electric brakes. The blue wire from the brake controller should be ran all the way to the 6 pole trailer connector on the vehicle and the brake circuit on the 6 pole trailer connector and will power the trailer brakes. The black wire on the 6 pole vehicle connector can be ran to the vehicle battery 12 volt power so that the trailer battery can be charged while towing, if needed. On our wiring page (see link below) the
  view full answer...


• What Trailer Wiring Harness Is Needed For 2001 Ford Explorer XLT
  
• The Tow Ready Custom Fit Vehicle Wiring, # 118344, is the wiring harness you will need if you do not have the factory tow package and your 2001 Ford Explorer XLT is a two door. If your 2001 Ford Explorer XLT does not have the factory tow package and is a four door, then you will need the Tow Ready Custom Fit Vehicle Wiring, # 118345. This harness has a modulite converter that draws power for the trailer lights directly from the vehicles battery. Both of the wiring harnesses connect the sam
  view full answer...


• Adapter to Connect 7-Way Vehicle End to 4-Pole round Trailer Connector on 2002 Mercury Mountaineer
  
• There is not a plug and play adapter to go from a vehicle end 7-Way connector to a 4-Pole round connector. One can be made to work with your setup using the following parts. Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End, item # PK12706 Bonded 4 Wire - per foot, item # 16-4B-1 Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End, item # PK11404 If you do not wish to build an adapter for your setup you can change out the trailer connecto
  view full answer...


• What Is Needed On 2004 Lincoln Aviator With Tow Package To Tow Coleman Camper With Electric Brakes
  
• You will need to install a brake controller on your 2004 Lincoln Aviator since you will be towing a camper with electric brakes. The brake controller supplies power from the tow vehicle to apply the brakes on the camper. Along with the brake controller you will also need a 4-way trailer connector on the rear of your vehicle and the # ETBC7 installation kit. I would recommend the Tekonsha Prodigy P2 Brake Controller # 90885. The Prodigy 2 brake controller is our best selling model. It can
  view full answer...


• Brake Controller and Wiring Recommendation for a 2003 Ford Explorer Sport Trac
  
• Unlike some other vehicles, such as the Ford F150, there is not a port under the dash of your 2003 Ford Explorer Sport Trac that you could simply plug into and have a brake controller ready to go. If you are going to be installing a brake controller and the 7-Way plug at the same time, I would recommend getting the brake controller installation kit # ETBC7, which includes everything you will need to complete the installation. I included instructions for the # ETBC7 as well as a video of th
  view full answer...


• How to Find the Reverse Light Circuit on a 1997 Ford Van
  
• The easiest way for you to find the reverse wire in your tail light harness would be to use a Circuit Tester Kit # 40376 to test the wires in your tail light harness for voltage when the reverse lights are on. I attached a review video for you to check out about testing wires for voltage using this product. And then for a ground you could just attach the wire to a clean metal portion of your 1997 Ford Van body or frame. I searched around on the internet and could not find any wiring diagra
  view full answer...


• Installation of T-1 Vehicle Wiring Harness on 2002 Ford Explorer Sport Trac
  
• The T-1 Vehicle Wiring Harness you referenced, part # 118344 would plug inline into the existing wiring harness behind each of the tail light assemblies on your 2002 Explorer Sport Trac. The lead with the yellow wire is for the drivers side, and the lead with the green wire is for the passenger side. Access the rear of the tail light assembly by removing it from the vehicle. The factory wiring harness plugs into the rear of the assembly. Unplug the harness by depressing the locking tabs a
  view full answer...