T-One Vehicle Wiring Harness

Rating: rating rating rating rating rating
14 reviews

Code: 118334

Retail:$40.65

Price:$34.95

Shipping Weight: 2 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Trailer Wiring Harness Installation - 2003 Dodge Durango - Video
Trailer Wiring Harness Installation - 2000 Dodge Durango - Video

Tow Ready Custom Fit Vehicle Wiring - 118334

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

Provides a 4-pole flat trailer connector for the vehicle
Quick and Easy
No Cutting, Splicing or Taping
Just Plug in the T-One Connector and You're Ready to Tow
Solid One Piece Construction
16 Gauge Bonded Wire w/ 4-Flat Plug
"Factory" Appearance
Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points are located behind the vehicle tail lights. Wiring harness will remain in cargo area for storage when this connector is installed on minivans. The 4-pole trailer connector will be stowed underneath the vehicle near the bumper.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

Max. stop/turn light: 1 per side (2.1 amps)
Max. tail lights: (4.2 amps)

Read vehicle's owners manual and instruction sheet for additional information.

Replaces # 18334

Video of T-One Vehicle Wiring Harness

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video install trailer wiring 2003 dodge durango 118334

Trailer Wiring Harness Installation - 2003 Dodge Durango

Trailer Wiring Harness Installation - 2000 Dodge Durango

Video Transcript for Trailer Wiring Harness Installation - 2003 Dodge Durango

Today on this 2003 Dodge Durango were going to be installing wiring harness part number 118334. In the location of the ports we are going to be plugging our wiring harness into are located directly behind the tail lights of both the drivers and passengers side of the vehicle. In order to gain access to those these are two Phillips head screws per side, you just want to go ahead and remove those and allow the tail light to pop off. With the tail light pulled back you can see on the back side of the tail light is the connector we are going to be using. We will next need to go ahead and separate the connector from the tail light, and to do that if you look on the top side of the connector there is a red tab here, you want to go ahead and press it over, and that releases the safety clip, and then there is a push button release right here on the top as well, press that in, and pull the two pieces apart. We will go ahead and do that for the passengers side tail light as well and then we will go ahead and start plugging our harness in line.

So starting over here on the drivers side we are going to go ahead and start plugging our harness in line. There are two sets of connectors obviously one for the drivers and one for the passengers sides, and ones for the drivers side has the red, yellow and brown wires integrated into them. Theres the one end of our connector into the vehicle side connector, and again we want to make sure we push our red tab over to lock it in. Im going to hold off plugging the tail light back in to the other end just yet, because what we are going to need to do is take not only the passengers side connector, but the 4 pole end as well, and we need to get them underneath the vehicle and to do so we are going to feed them through the opening in the body and in the bumper here. Okay the next piece that we come to in our harness is the converter box here, and if you rotate it over you will see weve got double sided tape on it.

You want to go ahead and adhere to a part of the body structure here to keep from it jiggling around loosely as we drive along. What I am going to go ahead and do is clean out the underside of the bumper, and actually take and adhere it up underneath there like so. Okay with all that accomplished we could go ahead now and plug the other end into the back side of the tail light, and you could go ahead and put it back into place. Okay with the drivers light tail light on, we can continue underneath the vehicle now where were going to go ahead and route our remaining wires in place. The 4 pole I am going to go ahead and route to the center of the vehicle where you can either tie it off at your trailer hitch or use your mounting bracket to hold it in place.

And then we are going to go ahead and do the same thing with the passenger side connectors, however these obviously we will take all the way across and up through the opening between the body and the bumper on the passengers side. And then go ahead and repeat the same process over here on the passengers side. And with that, that will conclude the installation of wiring harness part number 118334 on a 2003 Dodge Durrango. .

This Product Fits The Following Vehicles

1998 - 2002 Dodge Durango

2003 - 2003 Dodge Durango All Models

1996 - 2000 Dodge Caravan All Models including 4WD

1996 - 2000 Dodge Grand Caravan All Models including 4WD

2000 - 2000 Chrysler Grand Voyager All Models including 4WD

1996 - 2000 Plymouth Grand Voyager All Models including 4WD

1996 - 2000 Chrysler Town and Country All Models including 4WD

2000 - 2000 Chrysler Voyager All Models including 4WD

1996 - 2000 Plymouth Voyager All Models including 4WD

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $4.99

Ball Mount 3/4" Rise or 2" Drop, 6,000 lbs $17.78

Hitch Ball with 2" Diameter and Medium Shank, 6,000 lbs GTW - Chrome $8.49

Ball Mount 2-3/4" Rise or 4" Drop, 6,000 lbs $20.63

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.00

Customer Reviews - Write a review about this product

T-One Vehicle Wiring Harness - 118334

Average Customer Rating: rating rating rating rating rating 4.8 out of 5 stars (14 Customer Reviews)