T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118317

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection point is located along the inside of the driver's side frame rail. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: (7.5 amps)
• Max. tail lights: (7.5 amps)

Read vehicle's owners manual and instruction sheet for additional information.

This Product Fits The Following Vehicles

1987 - 1989 Dodge Dakota

1986 - 1994 Dodge Ram Pickup All Models

1986 - 1988 Dodge Ramcharger All Models except with Skid Shield or Deep Drop Bumper

1986 - 1988 Plymouth Trailduster All Models except with Skid Shield or Deep Drop Bumper

1986 - 1988 Dodge Ramcharger All Models with Deep Drop Bumper except with Skid Shield

1986 - 1988 Plymouth Trailduster All Models with Deep Drop Bumper except with Skid Shield

1990 - 1994 Dodge Dakota includes Club Cab

1994 - 1994 Dodge Ram Pickup with 6 Foot Bed

1994 - 1994 Dodge Ram Pickup with 8 Foot Bed

1986 - 1994 Dodge Ram Pickup with Deep Drop Bumper

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Does the 4-Way on T-One Vehicle Wiring Harness, # 118317 Have Round or Flat Pins
  
• The 4-Way connector on the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118317, is a 4-Flat type connector that has round pins and accepts a trailer side connector 4-Flat that also uses round pins. I have included a link to a wiring FAQ that covers the different types of connectors.
  view full answer...


• Hidden hitch trailer harness
  
• If your brothers 97 Dodge Ram 1500 does not already have a factory 4-Way, he would need a Tow Ready Custom Fit Vehicle Wiring for the Dodge Ram Pickup, 1997, part # 118329. If it does have a factory four way, then he will not be able to use this wiring harness. From the 4-Way you will need an adapter, part # ETBC7, kit to convert the 4 way plug into a 7 way plug. I have attached a video below that details the installation, but basically you will be plugging the four way into the ETBC7 connec
  view full answer...


• Trailer Wiring Harness Recommendation for a 1994 Dodge Ram 1500 Short Bed Without Tow Package
  
• The Tow Ready Custom Fit Vehicle Wiring, # 118317, for the 1994 Dodge Ram plugs in line with the tail light wiring that is already present on your truck. The truck does not have to have any special pre-wiring or a tow package from the factory in order to install this wiring harness. I have incldued a link to the installation details for you to view.
  view full answer...


• Higher Amperage Powered Trailer Wiring Harness For Truck Camper and Trailer at the Same Time
  
• It sounds as if you may be overloading the tail light circuits on your 1990 Dodge Ram D250, causing electrical issues because of the extra lighting on your truck camper and your trailer. I would recommend going with the Modulite Ultra Protector Wiring Harness w/Integrated Circuit & Overload Protection, item # 119192. You will also need the Modulite Wiring Kit, # 118151, to complete the installation. When installing this harness on your 2 wire system (same bulb for stop and turn signals) you w
  view full answer...


• Wiring To Install 4-Way Trailer Connector on 1993 Dodge Dakota
  
• You would need to use a circuit tester like part # 3808, to determine which wires carry the running lights, turn signal and brakes on your 1993 Dodge Dakota. If you are wanting to install a 4-way wiring harness on your Dakota, we do have a plug and play harness available, checkout the Tow Ready T-One Vehicle Wiring Harness, part # 118317. I have linked an FAQ on wiring, at the bottom there is a table that shows the typical wiring colors and function for different vehicle manufacturers. You
  view full answer...