T-One Vehicle Wiring Harness with 4 Pole Trailer Connector

Tow Ready Custom Fit Vehicle Wiring - 118313

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

• Provides a 4-pole flat trailer connector for the vehicle
• Quick and Easy
• No Cutting, Splicing or Taping
• Just Plug in the T-One Connector and You're Ready to Tow
• Solid One Piece Construction
• 16 Gauge Bonded Wire w/ 4-Flat Plug
• "Factory" Appearance
• Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection point is located along the inside of the left rear frame rail. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: (7.5 amps)
• Max. tail lights: (7.5 amps)

Read vehicle's owners manual and instruction sheet for additional information.

This Product Fits The Following Vehicles

1980 - 1983 Ford F-100, F-150, F-250, F-350 All Models

1984 - 1986 Ford F-150, F-250, F-350 All Models

1983 - 1985 Ford Ranger All Models except GT

1980 - 1983 Ford F-100, F-150, F-250, F-350 All Models with Deep Drop Bumper

1984 - 1986 Ford F-150, F-250, F-350 All Models with Deep Drop Bumper

1980 - 1986 Ford Bronco Full Size

1980 - 1986 Ford Bronco Full Size with Deep Drop Bumper

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ask the Experts about this Tow Ready Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

• Instruction Manual Needed for a Tekonsha 2016 Hydraulic Brake Controller On a 1986 Ford F-250
  
• The wiring diagram for wiring your truck to your trailer can be found on our wiring page (see link). We also have a brake controller wiring diagram on our brake controller wiring page (see link). If you are wiring a 7-Way connector I would recommend the # ETBC7 wiring kit which has all of the wiring, circuit breakers and parts needed to install the 7-way once you have a 4-Way installed on the truck. If you need a 6-Way connector then the # ETBC6 wiring kit will be what you need. You can hard
  view full answer...


• Where to Find the Taillight Connectors to Install a T-One 4-Pole on a 1983 Ford F-250
  
• You are correct. The T-One Vehicle Wiring Harness with 4 Pole Trailer Connector # 118313, does plug into the existing wiring on your 1983 Ford F-250. It is not an empty plug that is easily visible. What you will do is plug in this harness in line with your vehicles taillight wiring. You will need to locate the taillight wiring harness inside the left rear frame rail on your truck. You will then plug the T-one harness in line using the existing taillight connectors. Next find a good place to g
  view full answer...


• Connection Point and Color Codes for Tow Ready Trailer Wiring for a 1986 Ford F-150
  
• The Tow Ready Custom Fit Vehicle Wiring, # 118313, is designed to just plug in line with the existing wiring harness on the truck. The connection point is located along the inside of the left rear frame rail. I have included a link to the installation details for you. The wire color and functions on this harness are as follows: White = ground Brown = running lights Yellow = left turn and brake lights Green = right turn and brake lights
  view full answer...