Wiring Harness Installation - 2007 Chrysler Pacifica - VideoWiring Harness Installation - 2003 Chrysler Pacifica - Video
Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Connector is Equipped with a Circuit Protected Modulite
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations. Also draws power for the lights on the trailer directly from the vehicle battery instead of through the vehicle's wiring system.
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection points on the Chrysler Pacifica are behind the taillights. The 4-pole trailer connector can be stowed inside the cargo area or under the vehicle close to the trailer hitch. If you want to keep the 4-pole under the vehicle, a mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (4.2 amps)
Read vehicle's owners manual and instruction sheet for additional information.
Instructions
