Wiring Harness Installation - 2007 GMC Canyon - Video
Wiring Harness Installation - 2008 Chevrolet Colorado - Video
Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese
- Provides a 4-pole flat trailer connector for the vehicle
- Quick and Easy
- No Cutting, Splicing or Taping
- Just Plug in the T-One Connector and You're Ready to Tow
- Solid One Piece Construction
- 16 Gauge Bonded Wire w/ 4-Flat Plug
- "Factory" Appearance
- Connector is Equipped with a Circuit Protected Taillight Converter
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
- Simple Do-It-Yourself Instructions on Every Package
Can be used with 5-pole, 6-pole or 7-pole adapters.
Installation: Connection point is located underneath the truck bed near the driver's side frame rail. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
- Warning:
- Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: (5 amps)
Read vehicle's owners manual and instruction sheet for additional information.
Picture of the connector.
This is a custom fit application for the following vehicles.
Use the
HitchHunter(R) to find what fits.
2004 - 2010 GMC Canyon All Models
2004 - 2010 Chevrolet Colorado All Models
2006 - 2008 Isuzu I-Series Pickup All Models
Reliability
Performance
Ease Of Use
Installation
Cost-Benefit
Easy installation
James H from Nashville,TN
Great product and was a breeze to install.