Tow Package Wiring Harness with 4 Pole Trailer Connector

Rating: rating rating rating rating rating
47 reviews

Code: 118248

Retail:$40.65

Price:$29.95

Shipping Weight: 2 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Trailer Wiring Harness Installation - 2006 Toyota Highlander - Video
Trailer Wiring Harness Installation - 2004 Toyota Highlander - Video
Trailer Wiring Harness Installation - 2006 Toyota Highlander Hybrid - Video

Tow Ready Custom Fit Vehicle Wiring - 118248

Tow Ready T-One Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

Provides a 4-pole flat trailer connector for the vehicle
Quick and Easy
No Cutting, Splicing or Taping
Just Plug in the T-One Connector and You're Ready to Tow
Solid One Piece Construction
Exact replacement harness for vehicles equipped with factory tow package wiring
16 Gauge Bonded Wire w/ 4-Flat Plug
"Factory" Appearance
Connector is Equipped with a Circuit Protected Modulite
- Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations. Also draws power for the lights on the trailer directly from the vehicle battery instead of through the vehicle's wiring system.
Simple Do-It-Yourself Instructions on Every Package

Can be used with 5-pole, 6-pole or 7-pole adapters.

Installation: Connection point is located underneath the trunk floor panels and trays on the driver's side. The 4-pole flat trailer connector will be stored inside the rear cargo area of the vehicle. 10amp Fuse is included to plug into the Towing Fuse location.

Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

Max. stop/turn light: 1 per side (2.1 amps)
Max. tail lights: (5 amps)

Read vehicle's owners manual and instruction sheet for additional information.

Video of Tow Package Wiring Harness with 4 Pole Trailer Connector

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video wiring install 2006 toyota highlander

Trailer Wiring Harness Installation - 2006 Toyota Highlander

Video install trailer wiring 2004 toyota highlander 118248

Trailer Wiring Harness Installation - 2004 Toyota Highlander

Video Wiring install 2006 Toyota highlander hybrid

Trailer Wiring Harness Installation - 2006 Toyota Highlander Hybrid

Video Transcript for Trailer Wiring Harness Installation - 2006 Toyota Highlander

Today we are going to do an install of part number 118248 the T One connector from Tow Ready. It will be installed on our 2006 Toyota Highlander. To get to our access point which is about down here and underneath this panel. So we will have to roll back the carpeting and pull up the tray and gain access that way. Once you get everything out of the way it is pretty clear that this is the plug right here for the harness. So our T connector can plug right into here. Then our ground wire will actually mount to this ground bolt right here. We took our ground bolt out and we will simply install our ground wire here and run it back through there and install it. Next we will install the module box itself using the self adhesive tape that is on the backside of the connector.

We will hide it back in here in this cavity. Then we can string out our cable here and it is actually stored inside when it is not being used. The last thing we will have to do is install a fuse for our tow package. To install our fuse we will have to get underneath the hood to get to the fuse box here. Which is in this location right here where you will simply install the fuse. Back to the rear of the vehicle we are going to go ahead and zip tie all the loose wires in here into a wire bundle so we can keep everything nice and neat. Now we will go ahead and reinstall the interior. While we are reinstalling our interior there looks to be a little notch here. That is where we are going to push the wire into.

We will bring the leftover into the tray so it can be stored there. That is the install but now I am going to show you how to use it. You have to get back inside and pull your cover up and pull out the harness and leave it out by your hitch. Go ahead and shut the door on it because the door has plenty of wiggle room to make it work. That covers our install of part number 118248 the T One connector from Tow Ready. Installed on a 2006 Toyota Highlander.

This Product Fits The Following Vehicles

2004 - 2005 Toyota Highlander

2006 - 2007 Toyota Highlander All Models, except Hybrid

2006 - 2007 Toyota Highlander Hybrid Models

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Ball Mount 3/4" Rise or 2" Drop, 6,000 lbs $17.78

Pin and Clip For Class III, IV and V Trailer Hitch Receiver $4.99

Hitch Ball with 2" Diameter and Medium Shank, 6,000 lbs GTW - Chrome $8.49

American Flag 2" Trailer Hitch Receiver Cover $14.95

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.00

Customer Reviews - Write a review about this product

Tow Package Wiring Harness with 4 Pole Trailer Connector - 118248

Average Customer Rating: rating rating rating rating rating 5.0 out of 5 stars (47 Customer Reviews)