Circuit Protected Taillight Converter with 4-Pole Hardwire Kit (Includes Testers)

Tow Ready Wiring - 118175KIT

Capacity: 9.2 amps. This kit includes the 118175 circuit protected converter and everything else that is needed to complete the installation.

Adapts import and domestic vehicles with separate turn and stop lights (3-Wire System) to standard trailer taillight wiring (2-Wire System).

In a three wire system, a separate wire is used to carry each of the stop, turn, and running light functions to the taillight assembly. On most trailers, the stop and turn signal functions are sent through the same wire.

Features:

• Short circuit protection safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
• Adapts a 3 wire system on the towing vehicle to a 2 wire system on the trailer.
• Includes circuit tester and (5) quick splice wire connectors to aid in installation.
• Also includes 4-pole trailer connector cover

Specs:

• Wire pigtails measure 18" long
• 4-pole trailer connector is 60" long from converter box
• Will work on vehicles with LED taillights

Warning:

Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

• Max. stop/turn light: 1 per side (2.1 amps)
• Max. tail lights: (5 amps)

Read vehicle's owners manual and instruction sheet for additional information.

Recommended:

Wiring Harness Mounting Brackets

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Tow Ready Wiring

Do you have a question about this Wiring?