Front/Rear Hanger for Double-Eye Springs - 1-1/2" Tall - 9/16" Bolt Hole

Redline Trailer Suspension - 115917

Hanger can be configured to work in either the front or rear position to suspend your double-eye leaf spring.

Features:

• Configured for use as front or rear hanger
• Provides attachment point for leaf spring
  • Hanger suspends spring from trailer frame
• Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes
• Works with 9/16" diameter bolt (sold separately)
• Weld on application

115917 Front or Rear Hanger for Double Eye Springs - 1-1/2" Tall - 9/16" Bolt Hole

Customers Who Purchased This Trailer Suspension Also Bought...

Ask the Experts about this Redline Trailer Suspension
Do you have a question about this Trailer Suspension?

• Where to Install Shackle Straps and How to Determine Axle Position When Building an ATV Trailer
  
• For a 3,500 Dexter Straight axle the springs should be placed between 16 and 18 inches on center from the hub face (flat area the wheel mounts against). Placement of the spring centers in any other position will reduce the axle capacity. If you are using a different brand of axle you will need to contact the axle manufacturer for the full capacity spring center dimensions. If you are using double eye springs then the shackle straps will be located at the rear of the springs. The top bolt and
  view full answer...